STOP RIDE NOTICE: 2022 Polaris Matryx-- Merged the four threads together- Murph

[Biller]

Got ANOTHER recall on my 22 850 VR1......coolant hose rubbing on engine part. After 1300 kms mine was almost worn through. Part is backordered................

 

[eatsleepride]

Looking at my Throttle block, I do not see a ferrule on the end of the cable housing near thumb lever. The cable is free to rub the end of the cable housing? All of our earlier RMKs have had ferrules.

 

[Devilmanak]

I didn't read most of this, but just wanted to say: Take this seriously. Even if it hasn't stuck for lots of miles, don't not address it and assume that you are good, or that a tether will save your life. It could still stick at the most inopportune time if not addressed. I will leave it at that. Be safe.

 

[whoisthatguy]

Here's the bends I'm talking about. Top one right after the barrel adjuster, bottom right before the throttle body termination. Not good spots for tight bends. Maybe I'm over thinking it, but just seems wrong to me.

View attachment 383485

That metal casing tube should have extended around the bend in the cable, because the standard cable casing was not designed to be bent in that tight of a radius, imo.