C&S vs Burandt clutching

[motocrazy2006]

24 boost. P22 clutch. Stock other than TRS power valve and slp can.

Cycle and Sled Clutching.

Or Burandts set up?

I've heard good things about the boondocker weights.

Are C&S weights their own custom made or Who makes them?

 

[PSI 800]

TRS clutch kit

 

[A@ron]

TRS clutch kit

I second that

 

[Sheetmetalfab]

I second that

Third

 

[motocrazy2006]

If Tony had a setup for the P22 I would. He doesn't.

 

[gdn]

We run Boondocker talon weights and have been happy with them. Keep in mind if you do get those, you have to use the even numbered capsules with the P22 if it has the billet spider. The odd numbered capsules have a larger head and won't clear the spider.

 

[GSX97]

If Tony had a setup for the P22 I would. He doesn't.

Same. I decided to go with CNS after looking around. Would have used TRS if it didn't mean buying a new primary.
Haven't been out on the snow yet, so I can't make any comments on performance.

 

[Empire087]

I know you didn't mention them, but I went with speedwerx, only because their weights look very similar to talon weights, and they've generally got pretty good clutching. So far it runs good.

 

[Chad_Brochill]

24 boost. P22 clutch. Stock other than TRS power valve and slp can.

Cycle and Sled Clutching.

Or Burandts set up?

I've heard good things about the boondocker weights.

Are C&S weights their own custom made or Who makes them?

Ibexx could be an option as well.

 

[Buz]

Sorry to hijack but: I ordered the talon weights. I currently run 74 & 76 stock weights for 9R. I notice that the talon weights capsules 8,10,12 for 3-6000ft are 71+6=77, 71+7.2=78.2 and 71+8.25=79.25. Can someone tell me if you run a higher weight with the Talons or do I need to order capsule #6 71+4.9=75.9?

 

[NEWDUCK]

24 boost. P22 clutch. Stock other than TRS power valve and slp can.

Cycle and Sled Clutching.

Or Burandts set up?

I've heard good things about the boondocker weights.

Are C&S weights their own custom made or Who makes them?

It is their own weight and bushing.

I think they are offering a tri helix this year also. Not sure of the exact benefits but people seem excited about it.

The CNS vs Burandts(talon) weights definitely have two different ideas. Toe vs heel weight from the looks of it.

 

[Sheetmetalfab]

It is their own weight and bushing.

I think they are offering a tri helix this year also. Not sure of the exact benefits but people seem excited about it.

The CNS vs Burandts(talon) weights definitely have two different ideas. Toe vs heel weight from the looks of it.

The tri roller is from carl's cycle.

Not cycles and sleds. (Whoever they are)

 

[GSX97]

The tri roller is from carl's cycle.

Not cycles and sleds. (Whoever they are)

CNS also offers a tri roller setup, but not torsion like Carls

 

[Sheetmetalfab]

CNS also offers a tri roller setup, but not torsion like Carls

Is CNS some guys who used to work for bikeman / SSI?

I vaguely remember something about that.

 

[NEWDUCK]

Is CNS some guys who used to work for bikeman / SSI?

I vaguely remember something about that.

Not that I know of. Wasnt SSI a branch off of bikeman? Or BDX? Cant really remember.

This is their tri roller. Slightly different as it doesn't use the "wind up" spring. And most likely angle differences.

 

[GSX97]

Is CNS some guys who used to work for bikeman / SSI?

I vaguely remember something about that.

Not sure. I see posts about them here on snowest going back at least 10 years, website says "est 1996".
They were highly recommended by others which is why I went with theirs.

 

[rulonjj]

We’re running c&w clutching and tuning on 3 boosts. 2-24’s and a 23’. They all rip hard and have amazing bottom end. Definitely worth it.