Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

What oil do you prefer for your 2-stroke?

Which brand of 2 stoke oil do you run?

  • KLOTZ

    Votes: 98 9.8%
  • AMSOIL

    Votes: 300 30.2%
  • Redline

    Votes: 91 9.1%
  • Blue Marble

    Votes: 101 10.2%
  • Manufacturer brand

    Votes: 262 26.3%
  • cheap generic/general brand

    Votes: 143 14.4%

  • Total voters
    995
  • Poll closed .
Thread Rating
1.00 star(s)
Buying a 12000$ sled and guys are bitching about 40$ oil I have owned all 4 brands and run manufactures oil not worth the headache to switch and have a warranty fight. I tired amsoil in a ski doo third oil fill lost crank bearing dealer bitched about it but fixed it under warranty. Had to sign a agreement to use only doo oil on sled after that. Was an 800r had 4600 miles on it when sold it.
 
FWIW, I have run Amsoil Interceptor in my 09 RMK since the initial start up after having SLP install their 777 kit in it. Today, with 700 or so miles I finally deceided to check out my exhaust valves and clean them, if needed. Pulled the mag side and it was very clean and I could have left them alone. Here's the mag side valve, top & bottom, just out of the engine.

Top
06146934-F6A5-4CE8-A050-E4BEFFBD5CE2-705-000001C16B97118A_zps515e470e.jpg


Bottom
E54AEC3B-E063-4F26-8C01-75DD9D282C8E-705-000001C176477F6D_zps27cf8a63.jpg


The stuff you see is residual oil that I just wiped off. I started the sled long enough to reach about 80* and backed it out of the trailer and into the garage.
 
AMSOIL FLAT WORKS!

FWIW, I have run Amsoil Interceptor in my 09 RMK since the initial start up after having SLP install their 777 kit in it. Today, with 700 or so miles I finally deceided to check out my exhaust valves and clean them, if needed. Pulled the mag side and it was very clean and I could have left them alone. Here's the mag side valve, top & bottom, just out of the engine.

Top
06146934-F6A5-4CE8-A050-E4BEFFBD5CE2-705-000001C16B97118A_zps515e470e.jpg


Bottom
E54AEC3B-E063-4F26-8C01-75DD9D282C8E-705-000001C176477F6D_zps27cf8a63.jpg


The stuff you see is residual oil that I just wiped off. I started the sled long enough to reach about 80* and backed it out of the trailer and into the garage.

AMSOIL is a great product! It works!
 
We have been running Maxxima Super M in our race motor for the past 12 years. Super high compression with still no bottom end rebuild. We change the top end ever year and the cylinders still look brand new. I also run this in my dirt bike and in my M8, it is a great oil.
 
I use whatever oil Chris has in his garage. I make a pit stop when I go through Rigby. Thanks Chris! :D

Seriously, most independent two stroke mechanics I know swear by Amsoil. I use the Interceptor.


.
 
Last edited:
In my PRO RMK's and the XP/XM/Pro's that I take care of for people, I run the Legend ZX-2SR.

I pulled apart a 2012 800 ETEC last month that had 2600 miles on it to put in a drop-in-kit RKT kit... been running the 2SR since new... I could have put the pistons back in the sled... the wear was surprising as well as the fact that the exhaust valves were not gummed up since their last cleaning 1500 miles previously.

It's worth it to me plus 2 benefits... I like the smell of the exhaust when running this and I feel strongly that the non synth oils like this protect against corrosion better, especially when the sleds are left outside for weeks.


zx2srBig.png






.
 
Last edited:
Premium Features



Back
Top