Thinking of doing some work on my M7 soon.

[luv2sledmt]

I got an 06 with The Thing can, SLP intake and some clutch work. Im personally not a fan of adding timing, I had a 2.5 degree key and took it out and went back to stock. It added a low end stumble I hated. The can sound alot like the MBRP just a fuzz different, the quality is unbeatable though. Love the sled. Take a look at the can at thesledshed.ca.

 

[SoDakCat]

Not to hijack the OPs thread but Im looking at adding a BDX black box to my 05 M7. I alrady have a BMP pipe mod and can. would this be pushing it for not haveing a control box? I will be running egt sensors so I should be able to see if its going to melt down on me. Also it was mentioned before on useing a pressure regulator or reducer. Is there the ability to adjust pressure with the reducer or is it just set to a new lower pressure?
Sorry for so many questions Im trying to get my setup figured out for this year before the snow flies and hopefully that is shortly.

 

[bluebear]

Not to hijack the OPs thread but Im looking at adding a BDX black box to my 05 M7. I alrady have a BMP pipe mod and can. would this be pushing it for not haveing a control box? I will be running egt sensors so I should be able to see if its going to melt down on me. Also it was mentioned before on useing a pressure regulator or reducer. Is there the ability to adjust pressure with the reducer or is it just set to a new lower pressure?
Sorry for so many questions Im trying to get my setup figured out for this year before the snow flies and hopefully that is shortly.

Do a plug check! You should be fine with what you're running but do a plug check to make sure.

A fuel pressure REGULATOR allows you to increase or decrease the fuel pressure in all throttle positions. Its usually used to increase fuel pressure.

A fuel pressure REDUCER is an in-line jet used to lower fuel pressure at WOT.

 

[mn_sled_head_87]

hey everyone, i don't mean to hijack the thread, but i'm just wondering a quick question: i just picked up a full D&D setup last week (y-pipe, single pipe, and can), and i'm wondering if it's necessary that i MUST run a boondocker box? i ride in both MN and out in cooke city, if that factors in. thanks in advance!