"snow elimination" boards for us big guys (questioning strength)

[snow_god]

Get a hold of madsigntist. He builds EZ boards. No cutting required. it is just a overlay. Superb fit and finish. He builds TOP NOTCH products at a GREAT price. You wont be disappointed !!

http://www.snowestonline.com/forum/showthread.php?t=308092&highlight=ez+boards

Ive got a set ordered with him. Very reasonable price.

 

[prairiepowderhead]

Check us out at ww.betweenthelinesdesigns.com , we have come up with a silicone based epoxy that is 100% iceaphobic, Ice can not freeze to it at all, it is easy to apply in your garage and is very tough. We also have a harder material for coating the tunnel, inside and out, so this will keep the riding weight down about 20% because there will be no snow sticking to the under side of your tunnel. This can also be applyed to the a-arms, and rear suspension. This stuff is tougher than powder coating, at a fraction the cost and you can do it all yourself. We will also be coming out with a buff in for all plastics and skis, It will make your sled shine and keep any snow fron sticking to it.
Surefoot running board coating, and Surefoot sled coat. 208-868-3308

 

[XxXModRods]

Great look and super strong im pushing 260 plus gear

 

[Xcelerated performance]

B&M Fabrications or Feethookers

 

[christopher]

Check us out at www.betweenthelinesdesigns.com , we have come up with a silicone based epoxy that is 100% iceaphobic, Ice can not freeze to it at all, it is easy to apply in your garage and is very tough. We also have a harder material for coating the tunnel, inside and out, so this will keep the riding weight down about 20% because there will be no snow sticking to the under side of your tunnel. This can also be applyed to the a-arms, and rear suspension. This stuff is tougher than powder coating, at a fraction the cost and you can do it all yourself. We will also be coming out with a buff in for all plastics and skis, It will make your sled shine and keep any snow fron sticking to it.
Surefoot running board coating, and Surefoot sled coat. 208-868-3308

SUREFOOT ICE-FREE RUNNINGBOARD COATING


You wouldn’t cut a hole in the bottom of your boat to let the water out would ya? So why cut and drill on your new sled just to get rid of ice buildup.
SUREFOOT is specially formulated and proven to outperform ALL types of powdercoating and anodizing, and you can apply it at home.
SUREFOOT will not harm your sled and retains stock appearance for higher resale. It can even be applied on your aftermarket runningboard inserts.
There is no comparison… SUREFOOT™ RUNNINGBOARD COATING IS THE ANSWER TO SNOW AND ICE BUILD-UP.

• SPRAY-ON AMBIENT-CURE
• CURES IN AS LITTLE AS 8 HOURS
• COMPLETELY ELIMINATES ICE ADHESION
• RETAINS FACTORY RUNNINGBOARD STRENGTH
• COSTS 50-75% LESS THAN RUNNINGBOARD INSERTS
• REQUIRES NO CUTTING OR DRILLING ON YOUR SLED
• SPRAY-ON, DO-AT-HOME COATING LASTS YEARS
• LOOKS GREAT…EVEN AFTER HARD USE
• COMES IN EITHER MATTE GREY OR BLACK

SO STOP “CUTTING CORNERS” AND GIVE IT A TRY!
*1 kit contains ample solution to coat 1 pair of snowmobile runningboards
Price: $74.95

 

[Matte Murder]

Do you apply that to the heat exchanger too or just the tunnel around it. Man that stuff is expensive. There is so little area to cover on running boards and it's $75. I would like to dip my whole snowmobile in this stuff but that would be about $15,000. lol. How much to do the tunnel inside and out, the rails and skid arms and the spindles?