>>>>> OFFICIAL SKI-DOO 2017 SUMMIT REVEAL ((Full Details & Photos))
- Thread starter christopher
- Start date
I'd not be worried about a hole in the cooler... drain the coolant... dry/clean/abrade the area around it and use acrylic adhesive to bond on a small patch...refill/burp... done.
Looks like a really efficient design that will, no doubt, shed a lot of snow!
.
Looks like a really efficient design that will, no doubt, shed a lot of snow!
.
Was told they had things ready to last year, but pulled a week or 2 ahead of dealer meeting. To bring it out this year.
For what is worth.
Man I love the looks of that white and orange. But after having my light gray and white freeride (2014) and seeing how dirty that gets, I'd be nervous to see what that white tunnel and white side panels would look like after a few rides. And it looks like the white side panels have that rougher texture to it. My gray tunnel and white skid plate is so dirty and a task to clean.
To be honest with you I don't think any of this was influenced by the axys chassis other than the slimmer plastics which actually came from the old Pro. Doo didn't engineer any part of this sled in one year(the time they had to see the AXYS) this sled was redesigned from ground up in conjunction with the motor probably starting back in 2010 or sooner.
Ski Doo pricing
With the U.S exchange rate at $1.38 to $1 with the Canadaien dollar shouldn't the Doo's be much cheaper or is the U.S Government charging a huge tariff?
With the U.S exchange rate at $1.38 to $1 with the Canadaien dollar shouldn't the Doo's be much cheaper or is the U.S Government charging a huge tariff?
Can somebody help with finding the sled wraps in the catalog?
Page 128
T
tkuss
Well-known member
Man I am impressed with the new Doo's. I believe somewhere on this site, I predicted there would be minor changes to the XM chassis, I couldnt of been more wrong. Blown away they came out with a new chassis and and new engine this year. More power, lighter weight and im glad they narrowed up the body a bit, (axys still looks quite a bit narrower to me though, could be the bit wider ski stance), and im glad they raised up the boards a bit higher in the rear as I think this woulda made a noticeable positive difference in handling and traction just on the XM. Not to mention an all new engine which more or less addressed most people "issues" with Doo engines for long term durability. Alot of new parts and designs on the 2017 for sure. Would love to ride one next year, but im enjoying my pull and go 2016 T-3 to much to take a 4,000$ hit this year to upgrade to a first year model. But I will be on here alot next year seeing how you guys like the sled and if there are any kinks that need to be worked out of it....
Interested to now start hearing some ride reports from non sponsored riders.
Interested to now start hearing some ride reports from non sponsored riders.
Typically that difference has been with the shocks and chromoly vs steel suspension parts, mostly A arms.
Some BEHIND the scenes photos from last night from our friends at MOUNTAIN SLEDDER MAGAZINE.
http://sleddermag.com/behind-the-scenes-ski-doo-club-2017-showroom/
Behind the Scenes: Ski-Doo Club 2017 Showroom
The Ski-Doo Club 2017 Showroom reveal of the new BRP lineup happened last night, and 3000 lucky dealers and industry people got to see all the new sleds and gear firsthand in Dallas, Texas.
For mountain riders the reveal was huge, with a ground-up redesign of the 2017 Summit model including a totally new REV Gen4 chassis, 850cc powerplant and many more upgrades.
For those of us that couldn’t be there to see firsthand, here are a bunch of behind the scenes photo of the event and machines, courtesy of Motor Tech Enterprises in Golden, BC.
Here we go, in no particular order!
Here it is, the 2017 Summit X 850 E-TEC. Totally new design, new aggressive styling with a throwback to yesteryear. Gone are the flowing lines of the REV XM, for a meaner, tighter look.
Kinda like this bad boy coming atcha!
New RAS 3 front suspension is basically an upgraded version of the RAS 2 that is designed to work with the REV Gen4 chassis. The skis are unchanged Pilot DS-3 from 2016.
Here is the pDrive, BRP’s new drive clutch! They claim that it is maintenance-free! The old TRA-VII slider buttons are replaced with roller bearings for less resistance and faster response, along with other changes.
The 174″ Summit T3 is unchanged for 2017. It takes awhile to configure every model to a new chassis, and we suspect that BRP likes to dole out the new technology rather than blow it all on the entire lineup in one year.
The REV Gen4 has a new cooling tray that does away with external cooling fins. It has shown to be significantly better at cooling the engine. A new track with a 3.5″ pitch (not to be confused with lug size) saves 10lbs of weight with lighter and stiff lugs. The track is available in 2.5″ and 3.0″ lug specification.
Big surprise! It was dude soup hanging around the new Summit, hoping for a chance to talk shop with Carl Kuster.
The new 850 E-TEC pumps out 165hp, which is 10hp more than the 800 E-TEC. The 2nd generation direction injection engine was designed to be 30% more responsive that its predecessor.
Here is the superstructure of the REV Gen4. The biggest change is the placement of the new engine, which is more centralized for better maneuverability. The engine is placed farther back in the chassis and is centred laterally. A new tunnel has beveled edges that, along with a smaller seat, narrows the chassis between the rider’s legs.
The S-Module has been strengthened, and new RAS 3 geometry gives the Summit a higher ride to help the sled get up on top of the snow better.
A new 2-piece forged crank should improve durability in the bottom end. There is also a new delivery mechanism that puts oil directly to the crank bearings, which reduces consumption significantly.
With a more narrow body and “powderdynamic” body panels, a few things had to change in order to get the powerplant centred in the chassis. The oil reservoir now lives on the clutch side apparently.
The top of the tunnel has a new look along with the changed cooling tray beneath.
Another angle of the REV Gen4 superstructure.
Motor Tech Ent wasn’t the only dealership taking a million pictures at the event!
New body panels and a narrower platform should reduce paneling-out on steep sidehill maneuvers.
The new spring-check only Summit X looks pretty good in black.
The 2017 retains its 154″ track length, but the 163″ option has been replaced by a 165″ track.
http://sleddermag.com/behind-the-scenes-ski-doo-club-2017-showroom/
Behind the Scenes: Ski-Doo Club 2017 Showroom
The Ski-Doo Club 2017 Showroom reveal of the new BRP lineup happened last night, and 3000 lucky dealers and industry people got to see all the new sleds and gear firsthand in Dallas, Texas.
For mountain riders the reveal was huge, with a ground-up redesign of the 2017 Summit model including a totally new REV Gen4 chassis, 850cc powerplant and many more upgrades.
For those of us that couldn’t be there to see firsthand, here are a bunch of behind the scenes photo of the event and machines, courtesy of Motor Tech Enterprises in Golden, BC.
Here we go, in no particular order!
Here it is, the 2017 Summit X 850 E-TEC. Totally new design, new aggressive styling with a throwback to yesteryear. Gone are the flowing lines of the REV XM, for a meaner, tighter look.
Kinda like this bad boy coming atcha!
New RAS 3 front suspension is basically an upgraded version of the RAS 2 that is designed to work with the REV Gen4 chassis. The skis are unchanged Pilot DS-3 from 2016.
Here is the pDrive, BRP’s new drive clutch! They claim that it is maintenance-free! The old TRA-VII slider buttons are replaced with roller bearings for less resistance and faster response, along with other changes.
The 174″ Summit T3 is unchanged for 2017. It takes awhile to configure every model to a new chassis, and we suspect that BRP likes to dole out the new technology rather than blow it all on the entire lineup in one year.
The REV Gen4 has a new cooling tray that does away with external cooling fins. It has shown to be significantly better at cooling the engine. A new track with a 3.5″ pitch (not to be confused with lug size) saves 10lbs of weight with lighter and stiff lugs. The track is available in 2.5″ and 3.0″ lug specification.
Big surprise! It was dude soup hanging around the new Summit, hoping for a chance to talk shop with Carl Kuster.
The new 850 E-TEC pumps out 165hp, which is 10hp more than the 800 E-TEC. The 2nd generation direction injection engine was designed to be 30% more responsive that its predecessor.
Here is the superstructure of the REV Gen4. The biggest change is the placement of the new engine, which is more centralized for better maneuverability. The engine is placed farther back in the chassis and is centred laterally. A new tunnel has beveled edges that, along with a smaller seat, narrows the chassis between the rider’s legs.
The S-Module has been strengthened, and new RAS 3 geometry gives the Summit a higher ride to help the sled get up on top of the snow better.
A new 2-piece forged crank should improve durability in the bottom end. There is also a new delivery mechanism that puts oil directly to the crank bearings, which reduces consumption significantly.
With a more narrow body and “powderdynamic” body panels, a few things had to change in order to get the powerplant centred in the chassis. The oil reservoir now lives on the clutch side apparently.
The top of the tunnel has a new look along with the changed cooling tray beneath.
Another angle of the REV Gen4 superstructure.
Motor Tech Ent wasn’t the only dealership taking a million pictures at the event!
New body panels and a narrower platform should reduce paneling-out on steep sidehill maneuvers.
The new spring-check only Summit X looks pretty good in black.
The 2017 retains its 154″ track length, but the 163″ option has been replaced by a 165″ track.
S
snengineer
Well-known member
Yup! I tried a post forward T3....not sure why people ruin that sled with such a mod, great for climbing and terrible for everything else.
S
snengineer
Well-known member
Amen to that!
I
Insaneboltrounder/sjohns
Well-known member
I agree with an early post. Doo needs to make a quality shock package an option. I know they make the free ride but then you have to have the fatty and those hideous colours.
Similar threads
