Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

going to build an abomination!

Thread Rating
5.00 star(s)

roo

Active member
Premium Member
after talking to everyone hawkers, 2-moto and explorer, and spending time on these machines I am going to build a motorcycle posistion(handle bars mounted on top of forks), 2 stroke, CVT, sled suspension single ski. got laid off from my job on return from hawkfest, will give me the time to get a good jump on this project and maybe have it on the snow before it's gone!!!!!!

HAVE:
motor= mxz 440x 92 h.p. (with primary) donated by tony sexton

chassis= steel cr250 donated by darrel aka cyclops (frame soon to be butchered beyond belief) probally just use headtube.

using banshee seat and gas tank and upper section of frame (maybe just for pattern)

triple clamp, forks= 2001 cr250 off my bike will have third triple clamp located lower, made from an aftermarket fork brace.
___________________________________________________________________________________
drivers= stock hawk donated by onewoodsrider(not using due to diamond drive) thanks alot for the help though!
secondary=stock hawk donated by onewoodsrider
___________________________________________________________________________________
track=121" donated by defboy

rear skid= have original expert off 503, will use expert design and machine lighter componets.

bought 09 diamond drive, driveshaft, drivers, brake caliper and rotor off ebay with funding from ryan,(aka poacher) thanks a bunch for the donation ryan, I beleive this will make the project. it will free a ton of space and allow better location options. big thanks to tom at alaska toy rental for the ideas.

NEED:

diamond drive secondary (06 to present) 10.4 inch. (can use pre 06 10" if can't find.) may end up buying new $384, loaded with close to right springs?

brake lever/master off A SNOWMOBILE?


laid off, don't have alot of funding, will fund as much as possible, any parts donations, deals or loner parts would be awesome,(even to just get it going) will post and help with any and all info related to project for your use not out to make money, would like to see a cross between hawk and bike!!!!!! will draw up detailed blueprint when done. I AM LIFE LONG BUDDIES WITH A MINISPRINT FRAME BUILDER HERE IN WA WHO IS WILLING TO DONATE MATERIAL AND ALL THE FINISH WELDING.
 
Last edited:
Sounds like a really awesome project,I don't have any of the parts you described but if I come accross something I'll let you know.I'm playing with a simular idea,have a motor from a polaris scrambler(400cc liquid),forks from a cr,136 track.I've built these little one lungers to 75 reliable HP.Keep us up to date on your progress!!!
 
Niiice project !

You can count on me for the donation of a graphic kit for that !

Will the "hawk-bike" have a bellypan ?
 
Sorry about your Job

Do you have some sort of time line on your build?

Can you post a sketch?

Do you need help on a sketch?

Do you have a budy that can cad you with some kind of drawing

I could try and come up with some kind of scratch that might help but I also have come upon hard times
 
I have a new 121 track and have no intention of using it.
Pm one woods rider it is in his garage with the other hawk we got from Alaska.

I do need to find another front ski though;the new hawk came with the very old ski and it sucks.
We are looking into the rotary motor for our project Hawk (posably)

Let us know if you would like the track.
 
Crown and 7

Rude Awake are you still feeling the raff of the crown 7, great times, hope to see you again, fly out when roo gets his new machine together and rip Baker with us.
 
before the snow melts!

Do you have some sort of time line on your build?

Can you post a sketch?

Do you need help on a sketch?

Do you have a budy that can cad you with some kind of drawing

I could try and come up with some kind of scratch that might help but I also have come upon hard times

time is ??????????, hope to get parts together soon as I can, my hawk is rideable so time to go O.C.D. on a new project.

depends on how long i'm out of work! will get as much done during this time as possible. nice avatar!
 
turbo that rotary for 100hp or more!

ummmmmm crown!
yes im all better now!!! the trip home was very long and tireing!
started my diet yesterday so next time ya see me i wont be so outta shape! jumped on the scale and i was 340 im gonna try to get down to 250.

after watchin you guys, i wanna ride harder then ever. i wanna go big too!!!
 
Hey RudeAwakening,

I do CAD every day and would like to donate CAD and Design time / help to you.

-Let me know how / what ya need

Gary

-Sanity is relative; here in the asylum is where I belong
 
thanks for the track?

I have a new 121 track and have no intention of using it.
Pm one woods rider it is in his garage with the other hawk we got from Alaska.

I do need to find another front ski though;the new hawk came with the very old ski and it sucks.
We are looking into the rotary motor for our project Hawk (posably)

Let us know if you would like the track.

between you and tod now have 121" track, drivers,secondary and a messed up jack shaft (for mock up)

is it the orange ski? brian mcc is looking for 1,,,,,,,,or 10, he loves them??? his is wasted!
 
drawing

Do you have some sort of time line on your build?

Can you post a sketch?

Do you need help on a sketch?

Do you have a budy that can cad you with some kind of drawing

I could try and come up with some kind of scratch that might help but I also have come upon hard times

will work on something when I get the frame and motor etc.
 
spline shafts?

after talking to everyone hawkers, 2-moto and explorer, and spending time on these machines I am going to build a motorcycle posistion(handle bars mounted on top of forks), 2 stroke, CVT, sled suspension single ski. got laid off from my job on return from hawkfest, will give me the time to get a good jump on this project and maybe have it on the snow before it's gone!!!!!!

HAVE:
motor= mxz 440x (with primary) donated by tony sexton

chassis= steel cr250 donated by darrel aka cyclops (frame soon to be butchered beyond belief)

triple clamp, forks= 2001 cr250 off my bike

bearing carriers (for jack and drive shaft)= had heavy duty machined previously

drivers= stock hawk donated by onewoodsrider

secondary=stock hawk donated by onewoodsrider

track=121" donated by defboy

rear skid= have original expert off 503, would like to come up with lighter skid off newer sled with good performing suspension, don't know alot about sled suspension. any advice, donations, deals or loners would be great. will use expert if have to and machine lighter componets later.

NEED:
hawk jack shaft , needs to be steel so I could spline the ends and run chain drive. won't have room for belt drive (saw someone was having chromolly ones made?) COULD MOCKUP WITH STOCK AND GET STEEL WHEN READY. defboy and onewoodsrider donated a stock alum. for mockup.

hawk drive shaft, (is stock hollow? if so need solid)COULD MOCKUP WITH STOCK AND GET SOLID WHEN READY.

laid off, don't have alot of funding, will fund as much as possible, any parts donations, deals or loner parts would be awesome,(even to just get it going) will post and help with any and all info related to project for your use not out to make money, would like to see a cross between hawk and bike!!!!!! will draw up detailed blueprint when done. I AM LIFE LONG BUDDIES WITH A MINISPRINT FRAME BUILDER HERE IN WA WHO IS WILLING TO DONATE MATERIAL AND ALL THE FINISH WELDING.

does anyone see a problem splining the ends of chromolly shafts? would think with a good spline would be more than strong enough? any advice is more than welcome!
 
twas a night of spirets!!!!!!!!!!!

turbo that rotary for 100hp or more!

ummmmmm crown!
yes im all better now!!! the trip home was very long and tireing!
started my diet yesterday so next time ya see me i wont be so outta shape! jumped on the scale and i was 340 im gonna try to get down to 250.

after watchin you guys, i wanna ride harder then ever. i wanna go big too!!!

feel bad for the drowning, will keep it little lower key next year, (yeah right) good to meet you, had a ton of fun. just got done straightening the front of my hawk, didn't know I hit that tree that hard! hope to see ya again next year.
BIG GUYS ARE COOL!
 
does anyone see a problem splining the ends of chromolly shafts? would think with a good spline would be more than strong enough? any advice is more than welcome!

If I were you i'd just whip a STD 5/16" square keyway at it. Simpler and you could probably find a secondary pretty easily for it. Trying to spline the end of a shaft will be a lot more hassle (get the right cutter, proper spline depth).
That's how I see it being an ex-machinist...

That being said, I think it would work on 4130 for sure no problem. I'd gundrill that out so it's hollow & lighter as well.
 
Really nice to hang with you and take you to our favorite Thai place

Welcome by the house anytime. I was so happy that Paul and Laura joined us, they have been with us since the beginning and are great friends. What a nice evening of Hawk talk. You seem to have a significant background in designing some pretty amazing things. I'm sure you abomonation of the Hawk will be a great project and a ton of fun.

Tam
 
Premium Features



Back
Top