bdx block offs for tm7 question?

[WKR]

Anyone run the bdx block off on the tm7? I blew a hole in one of supreme tools exhaust valve bellows and would consider trying the bdx blcok off as an option. Just curious if the sled will still run descent or if it will get to boggy on the bottom end. Not concerned about fuel mileage, just drivability. anyone with any experience with this setup? I took it out last night and the thing runs like chit, I need to guy through this weekend, no one has ever run this on a turbo m7 before? need to know whether this thing will get me through till my new exhaust valves get here.

 

[DWHalverson]

I would like to use these also. I can't see why the bottom end would suffer if they build the delete valve like the stock one in the lower position. I have heard fuel consumption goes up, although I have not tried these.

 

[WKR]

I would like to use these also. I can't see why the bottom end would suffer if they build the delete valve like the stock one in the lower position. I have heard fuel consumption goes up, although I have not tried these.

if they built the valve in the lower position the exhaust port would never be open fully and your top end would suffer greatly would it not? not sure, just asking. I have put a set in and once I try them will post how it went. Hoping to find out what to expect before hand though.

 

[WKR]

ttt

need some advice???

 

[nickracer9]

my buddy said his 09 m8 lost all botom end with them in place.