bd turbo pipe.A++

[venom1000]

just figured I'd drop a line for anyone that's considering the bd turbo pipe.it's worth the $$.noticeable difference,feels like another 20hp and pulls like a freight train.easy 2 tune with minimal fuel changes.really woke up my pump gas kit.Looks pretty sweet 2.

 

[mr990]

what r ur #s now ? hope mine is here soon

 

[colorado logger]

Pipe

What was your max boost before, did the pipe gain you any.

What elevation you riding at?

 

[Seth Wilson]

who pipe better

speed werx makes a pipe, whos pipe is better?

 

[JHG]

speed werx makes a pipe, whos pipe is better?

Boondockers is cheaper buy a couple hundred $$$. I haven't tried the two back to back to know which one works better but I know boondocker got some support from cat to hep design theirs.

 

[colorado logger]

Thanks Joe, Turbo's are a blast

 

[turboless terry]

speed werx makes a pipe, whos pipe is better?

I talked to Burandt at the Utah snow show and he said they both worked good but the speedworks pipe had more hit.

 

[venom1000]

what r ur #s now ? hope mine is here soon

#'s didn't change much.but i think the #'s r (psi)26 34 48 with some fine tuning in the rpm settings.i'll have to check to make sure.we have 4 turbos in our group 2 09's ,an 010 and a 07 all running boondocker pg turbos.the #'s on the 09's r pretty close but the other 2 not so much.

 

[mr990]

great i rode one with a speedwerx pipe #s were real close too so thats great just put it on and ride . what rpm r u runnin did it change

 

[venom1000]

great i rode one with a speedwerx pipe #s were real close too so thats great just put it on and ride . what rpm r u runnin did it change

Rpm before the pipe was right around 7700.now with the pipe its 8100+

 

[venom1000]

What was your max boost before, did the pipe gain you any.

What elevation you riding at?

boost right around 8lbs.really not sure if it changed a lot.weather wasn't that great so didn't spend much time looking gauges,more on where I was going. riding elevation is 6-8000ft

 

[mr990]

what r u duty cycles at 8# with pipe r u in the high 90s? the sled i rode with pipe ran less boost then me but ran higher duty cycles

 

[dubbs]

Ideal RPM

Rpm before the pipe was right around 7700.now with the pipe its 8100+

I've heard that the speedwerx pipe makes more power at lower RPM... Do you think you need more primary weight now with this pipe?

Anyone know what the ideal RPM is for this pipe?

 

[ArcticFX]

ideal RPM is around 8100-8200. Run 77g weights.