TRS Clutch Kit Components

[Wheel House Motorsports]

First, I would like to thank everyone that has purchased a clutch kit from me. The support has been beyond expectation. Sales are three fold of last year. Thank you.

Every single person that has rode one of the sled's ive setup now pretty much seems to sell another kit! lol Once you ride it its really hard to go back to anything else.

 

[d8grandpa]

What are you guys running for weight, and what rpms and track speeds are you seeing on a good pull.
I have the kit on a 19 x174. Have the 66g weights have a 125-280 spring and am still seeing 84-85 rpm. Going to put in a 260 spring but think i need to move up more weight.

 

[damx]

My sled feels best at 8200-8300.

 

[TRS]

What are you guys running for weight, and what rpms and track speeds are you seeing on a good pull.
I have the kit on a 19 x174. Have the 66g weights have a 125-280 spring and am still seeing 84-85 rpm. Going to put in a 260 spring but think i need to move up more weight.

I sent a PM. Give me a call tomorrow.

 

[TRS]

I’m only short helix’s at this point.
I have weights, springs, spider shims and alignment bars.
Thanks again for your business.

 

[379cat]

I’m only short helix’s at this point.
I have weights, springs, spider shims and alignment bars.
Thanks again for your business.

Are you still thinking Christmas for the helix?

 

[TRS]

Are you still thinking Christmas for the helix?

Venom informed me it will be after the 1st of the year. They are on a well needed vacation.
Merry Christmas to everyone. May your Holiday be filled with joy....and a big snow storm.

 

[TRS]

Thought I would pass on a video of Caleb in Whistler.
Caleb has been running my TRS clutching this winter.

 

[Wheel House Motorsports]

These 2020 850's are taking some impressive weight to tame, the updated mapping and motor changes are making for one hard hitting combo!

 

[TRS]

These 2020 850's are taking some impressive weight to tame, the updated mapping and motor changes are making for one hard hitting combo!

Thanks Nick. You and your crew have been great ambassadors promoting my clutching.

 

[greasemonkey3406]

I have the indy dan trail weights in mine fully loaded at 76.2g. Running at about 1800 ft. I was in 3 feet of snow today still hitting over 8300 rpm at times. I cant believe the bottom end it has compared to my 2019.

 

[diamonddave]

Impressive. With Dan's helix as well?

For comparison, I run 76g lightenings with Tony's helix and spring choice on 800's with 7 lbs. of boost at 3-6.

 

[TRS]

What’s even more interesting.
We were tuning on a 2020 Khaos 2.6 last week at 9800’.
The clutch setup almost mirrored an 800 5# sidekick.
Polaris has a runner in the 850.???

Three thumbs up and 5 snowflakes.

 

[Cerez86]

What’s even more interesting.
We were tuning on a 2020 Khaos 2.6 last week at 9800’.
The clutch setup almost mirrored an 800 5# sidekick.
Polaris has a runner in the 850.???
❄❄❄❄❄
Three thumbs up and 5 snowflakes.

I can only agree they pull really strong !
I must ask do you ship overseas ?

 

[diamonddave]

Wow, then there must be a big difference between the '19 and the '20. I have yet to ride this year but that is very surprising.

Maybe I should stop on my new 800 build and buy a 2020 840.

 

[greasemonkey3406]

Impressive. With Dan's helix as well?

For comparison, I run 76g lightenings with Tony's helix and spring choice on 800's with 7 lbs. of boost at 3-6.

Yes, I have the complete kit. I can pick either a 62 or a 66 degree with the helix. Right now I have it on the 62. It doesnt even have 5 hours on it yet so the rpm might creep up a bit more as I break it in. Not sure what I will do to bring it down. I need to get the front end down on it too. It just jumps up on top of the snow. That 2.7 track might have a bit to do with it too because it bites hard.

 

[diamonddave]

Dan is running a 62/64 degree helix?

 

[TRS]

I can only agree they pull really strong !
I must ask do you ship overseas ?

Yes we do. Send me an email at snowrace33@gmail

 

[dktraw]

2020 163 2.6, Running Tonys kit at 6-8k feet and loving it. Had to go heavier on weights, was turning 8400 with the 68g weights kit originally came with, ordered a set of 70s from tony to try and hold this thing back!

 

[Cerez86]

Yes we do. Send me an email at snowrace33@gmail

Will do ??