X3 turbo!!!!
<<< SnoWest Arctic Cat FREE SLED Giveaway>>>
- Thread starter christopher
- Start date
- Status
Can't go wrong with a turbo on any mountain sled!
'16 Front end
'16 clutches and jackshaft
'16 rails and shocks
'16 7" ski's
Fox Float 3 evol R Kashima coated front shocks
3" riser on an HCR steering post
Frogzskins venting to cover up gaping holes
Diamond S Ti Quiet Can
BDX/Cat boards
Narrowed panels
Cat proclimb front bumper
Belt drive by any of the 3 that offer them (TKI, C3, MVM)
Stock motor to keep reliability
Rear snow flap delete
Side panel intake clutch vent flipped inside out and put on exhaust side panel
Cat Belly pan
Cat or Aftermarket Tether
3" Powerclaw track
Frogzskins top of hood vents
'16 Cat storage seat
Skinz windshield bag
Skinz knee pads
Keep stock hood and lights to keep it quiet and have lights still
Thunderproducts glide washers under primary spring
Speedwerx H5 primary spring 120-310 if it works with the Team primary
Muffpot
'16 clutches and jackshaft
'16 rails and shocks
'16 7" ski's
Fox Float 3 evol R Kashima coated front shocks
3" riser on an HCR steering post
Frogzskins venting to cover up gaping holes
Diamond S Ti Quiet Can
BDX/Cat boards
Narrowed panels
Cat proclimb front bumper
Belt drive by any of the 3 that offer them (TKI, C3, MVM)
Stock motor to keep reliability
Rear snow flap delete
Side panel intake clutch vent flipped inside out and put on exhaust side panel
Cat Belly pan
Cat or Aftermarket Tether
3" Powerclaw track
Frogzskins top of hood vents
'16 Cat storage seat
Skinz windshield bag
Skinz knee pads
Keep stock hood and lights to keep it quiet and have lights still
Thunderproducts glide washers under primary spring
Speedwerx H5 primary spring 120-310 if it works with the Team primary
Muffpot
B
bradburck
Well-known member
My dream 16 cat...
16 spindles with zbros high rise arms
Gripper skis or similar size and flex
Kashima coated custom valved floats all around
Lite-weight hood with intake
Headlight delete with helmet light
C3 Post forward kit
1-1/8 flat bars with RSI hi-heat warmers and ODI grips
Speedwerx high-pressure super-charger
3" 162" powerclaw
KMOD titanium edition
Skinz Ras boards to narrow up panels
Trail tank
WRP seat
Cat sport bumper
Cat upgraded rear bumper
Skinz bags all the way around- tunnel, NXLVL windshield and handlebar
16' stock clutches
Belt drive of your choice
Custom wrap
16 spindles with zbros high rise arms
Gripper skis or similar size and flex
Kashima coated custom valved floats all around
Lite-weight hood with intake
Headlight delete with helmet light
C3 Post forward kit
1-1/8 flat bars with RSI hi-heat warmers and ODI grips
Speedwerx high-pressure super-charger
3" 162" powerclaw
KMOD titanium edition
Skinz Ras boards to narrow up panels
Trail tank
WRP seat
Cat sport bumper
Cat upgraded rear bumper
Skinz bags all the way around- tunnel, NXLVL windshield and handlebar
16' stock clutches
Belt drive of your choice
Custom wrap
Sounds great
If you make it look and feel like a 2016 you will have done a great job.. A tether is a must. The narrow ski stance would be nice andI would leave it a 2.6 in vice a 3in track.
If you make it look and feel like a 2016 you will have done a great job.. A tether is a must. The narrow ski stance would be nice andI would leave it a 2.6 in vice a 3in track.
Wishlist
2016 spindles A-arms and skis
2016 Rear skid with Ice Age Pro-motion
Shock package from Zbroz
BDX boards
Fire n ice carbon fiber hood and venting
WRP lowered seat
Belt drive from TKI
Supercharger would be something different
A larger gas tank so you don't have to carry extra
2016 spindles A-arms and skis
2016 Rear skid with Ice Age Pro-motion
Shock package from Zbroz
BDX boards
Fire n ice carbon fiber hood and venting
WRP lowered seat
Belt drive from TKI
Supercharger would be something different
A larger gas tank so you don't have to carry extra
Opening the crate today to take a look at our project sled.
Body kit
Street glow
Curb feelers
Hydraulics kit
Fuzzy dice
5% tinted windows
24" rims
Sick splash vinyl graphics
Chrome exhaust tips
.....Oh wait, this is for a snowmobile?
(Do those mods/accessories even work together lol?)
In all honesty, this is a sweet deal. Thanks for stepping up, Cat. I think the hit list has been covered (more than once), I know you'll build a sweet sled Chris - keep us updated, hope you get some great input and/or assistance from the Cat guru's on here! This sled could be a monster and would sure look nice in my garage.
Street glow
Curb feelers
Hydraulics kit
Fuzzy dice
5% tinted windows
24" rims
Sick splash vinyl graphics
Chrome exhaust tips
.....Oh wait, this is for a snowmobile?
(Do those mods/accessories even work together lol?)
In all honesty, this is a sweet deal. Thanks for stepping up, Cat. I think the hit list has been covered (more than once), I know you'll build a sweet sled Chris - keep us updated, hope you get some great input and/or assistance from the Cat guru's on here! This sled could be a monster and would sure look nice in my garage.
New challenge.
We need to NAME this project sled.
What should we call this sled going forward??
We need to NAME this project sled.
What should we call this sled going forward??
Last edited:
so what does "reflects the standards of arctic cats" really mean? just putting on things out of their accessory book? or are we thinking more along the lines of another speedworks built supercharged machine with a carbon chassis?
I doubt we are going to pull off a Carbon Fiber Chasis..
But the page is open for the moment on what we will do to this sled.
The guys at SnoWest ARE reading all of the posts and watching the conversation closely.
That sled is siiiiiccckkk! Could use some lovin though,
Boards
Fixed steering post
All 16 updates
3" p claw
Belt drive
Maybe some luggage holders?
And a new owner
Boards
Fixed steering post
All 16 updates
3" p claw
Belt drive
Maybe some luggage holders?
And a new owner
Would there be any way you guys could customize the body panels? Make them fit better and a little narrower. Also can you guys re do the handle bar controls and place them on the sled? Just cleaning up the bars would be a nice improvement.
Can't forget a bad *** mod is the gauge reflash.
And a name.... I'll have to think for a while
Can't forget a bad *** mod is the gauge reflash.
And a name.... I'll have to think for a while
- Status
Similar threads
