SLP pipe personal experiences?

[meathooker]

Can anyone compare the slp pipe vs bikeman?

See my post above. Bikeman has it dialed

 

[800poodragon]

So are you running 10-62's or 10-64's? And is this on a 16 or 17 axys, belt drive or 3"? Thanks in advance.

I have not had the clutch apart yet but I do believe it has the 10-64's. It is a 17 Axys 163 track 2.6 paddle. Stock belt drive.


Thinking I might try the Carls clutch parts I have this weekend just to see what difference is. We are supposed to get a fair amount of snow.. Guess I can always put it back the way it was if I don't think it does as well.

 

[B2]

I have a 17' 163" and 3" track. With stock clutching it spins 10-64's at 8350-8400 rpm at 9000'. I have ridden well over 10,000' and it struggled to pull 8100 rpm but sled was still fairly new and running rich on break in.

 

[800poodragon]

I have a 17' 163" and 3" track. With stock clutching it spins 10-64's at 8350-8400 rpm at 9000'. I have ridden well over 10,000' and it struggled to pull 8100 rpm but sled was still fairly new and running rich on break in.

I waited to put the pipe on till I was past the 18 hour break in. During break in with stock pipe it did not go over 8250. Was riding 6000 to 8000 feet

 

[FirstPlaceParts]

I started gearing my sleds way back when I had a 1997 ZR 580 and have geared all my sleds since, expect my belt driven Polaris sleds.

Just installed the SLP Stage 3 Kit and was wondering what the size, or old school sprocket number, for the belt drive pulleys you are going to. I searched Google and eBay for the Pro Ride pulley and did not find much.

Thanks
Mark

 

[TheBreeze]

There are not much left on fleabay.... everyone has been buying them up!

Top:
SPROCKET, 21T
3222204

Bottom:
SPROCKET, 44T
3222220