Pro display screen is reading the mph wrong

[tmbl52]

I had the new silber update map done and now
Display is reading mph at 4 times the actuall
Speed. In other words, the speedo says I'm going
160 miles per hour on the trail and the odometer has the same problem
Why is it doing that

 

[LoudHandle]

More info would help but my guess is you got the Flash for a chain case model and you have the QD? As the chain case models have the pickup on the drive shaft and the QD sleds grab it off of the brake disk on the jack shaft. The MFD correction factor difference is roughly 2.8 (calculated as I have no access to the MFD's software, nor dealer affiliation), if they added an additional percentage for a driver swap or gear change, it could be where the multiplier is coming from.

 

[snosfun]

Yep. Same here for me. I even wrote with permanent marker on my ecu what I had for a set up and year of sled hoping they wouldn't get confused when I sent it in for reflash. Guess that didn't work. Ugh now I have to waste more money for shipping and down time.

On the other hand, the new map works awesome for me so far.
And my buddies sled with the new self lube works great too.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[LoudHandle]

If you'd rather not miss any riding, I am a dealer for the SpeedoHealer. That can rectify the problem without a re-flash, but when it's Silber's mistake they should be footing the bill including shipping, IMO.

If interested check out my Thread

http://www.snowest.com/forum/showthread.php?t=377709

PM me if that does not answer your questions.

 

[tmbl52]

That's great that I have 300 extra miles on the machine now because of that

 

[tmbl52]

Justin is saying I have to send it back
Along with the stock ecu to get this resolved
Christmas is a bad time to be shipping stuff
Across the country.