OFT to the mountain... it's a 153" Phizzer stretch

[MotoPsycho]

Thanks McLovin!

Alright, final installment of the Phizzer stretch.
Here are the Nytro drivers/extro's installed

There is a fair amount of room between the extro's and the rail tips... no worries

Plenty of room for the 2 1/4" lugs as well... I think you could run 3"; even with the larger Nytro drivers

Here, you can see the difference in gears... I think she'll do okay with the 56 bottom...

Believe it or not, you can fit 14 5/8" of track under the Phazer... It requires A LOT of cursing, beer, perfect driver alignment, and custom fitment; but it WILL work!

... AND VOLIA! Another "Over the top" build from OFT Racing!

BEFORE:

AFTER:

 

[MotoPsycho]

​

​

 

[Submission Motorsports]

Looks good Moto...

 

[ak]

14 5/8 fits but its tight Thats whats on mine, 7 tooth 3.0 pitch avids require you to cut the rail tips. A timbersled skid move's the rails back about a 1/2inch.

 

[MotoPsycho]

These are OEM Yammi Nytro drivers... there is about 1/2" of clearance with them.

 

[MTdream]

Nice project!!! still love the burnt orange colors...

got my rails off today, and sending to your co-hort in arms!!!

 

[Shawnmcgr]

How do you think the water is getting in?

 

[kingsandman]

Moto, left you some info on TY site. Double check by pulling the skid frame, remove shocks and springs and reinstall skid. Cycle the suspension and you'll see they do hit. That's what we did to confirm on the '07's with Nytro drivers. 7 tooth Nytro drivers are the same size as 7 tooth avids. Not bashing, just don't want you to have a problem.

 

[827revdog]

looks great moto. wheres the pipe and better boards?

 

[MotoPsycho]

How do you think the water is getting in?

I really can't say. It would be nice to know though... so it can be addessed.

looks great moto. wheres the pipe and better boards?

The Better Boards are still on the bench... I've been trying to get everything buttoned up before Hay Days - they'll have to wait until I get back. As far as a pipe... stay tuned - might have a gooder for that!

 

[McLovin]

Did you leave the reverse alone while you were in there? Its the weak link on these sleds. The gearbox isnt ment for large amounts of torque just a heads up. If you eliminate the reverse completely it allows for a solid one piece shaft vs the 2 piece hollow shaft. Something to keep in mind if you go turbo/blower route. Looks real nice though and you will love the better boards every sled should have them.

 

[827revdog]

moto has this seen the snow yet? just wondering how stiff the torsions were. grt the pipe built yet?

 

[MotoPsycho]

moto has this seen the snow yet? just wondering how stiff the torsions were. grt the pipe built yet?

Alas my friend, no. My guess is, there is more snow where you are than where I am... .

No problem hitting 20-40 below for weeks on end, but somehow it refuses to snow... hopefully soon!

 

[MotoPsycho]

Well, things seemed to all come together well...

 

[MTdream]

yeah, and that isnt the amazing pics...carrying stoli (280 lbs.) up that hill was KILLER!!!!

 

[MotoPsycho]

Last pic of this sequence... 6' 5", 285 lbs and highmarkin' on a Phizzer (there was a bit of poaching! )

 

[TApeX_07]

What method did you use to cut the track down??

 

[MotoPsycho]

What method did you use to cut the track down??

I used an electric tire groover. Since I left the track 14 5/8" wide, I didn't have to get into the fiberglass bars - it worked well.

 

[scmurs]

I used an electric tire groover. Since I left the track 14 5/8" wide, I didn't have to get into the fiberglass bars - it worked well.

My back still feels stiff from digging you out. What was that Moto quote about "us westerners" and "throwing down" and.......???????

Someone throw in the picture of me head over heels and all will be even.

Thanks for the good times MT

scmurs

 

[MotoPsycho]

Someone throw in the picture of me head over heels and all will be even.

Which one? There are sooooo many!