New thread with pictures of your Edge.

[Gold5th]

Heh actually, no.. my right side ribs hurt for a week, but turns out I had a rash there, so it wasn't related.. or so I think... other than that I was fine. interesting considering I buggered myself in the army (Fractured my L5 twice, the , 2 buldging disks, and roto-scoliosis due to compression) I'm not more buggered now

I've already taken my angle grinder to my edgem all the front suspesion and plastic is off, just need to cut away the mangled bulkhead to get at the motor.. I can see one motor mount was sheered off... but that's all I can see heh.. can't reach it at all...

 

[SixtySevenGT]

Here Are my Edges 2002 - 700 and 800 Both for Sale

Lee -208-859-6148

 

[HANDSOME]

TINMANS EDGE

 

[HANDSOME]

 

[HANDSOME]

Not many switchbacks with rolled chaincase and 163 DRAGONIZED.

 

[Rrrrrrandyw]

I just found this post even though it is pretty old, thought I would add my Edge pics to it. All of yours look great. Mine is a 03, Boss seat, Walker shocks, 159 x 2.4 3.0 pitch track, 700 twin with a Mitsubishi Evo Turbo, and a Boss Noss nitrous set-up which I have never used. I enjoyed looking at all of the other pics here, we should keep this going, maybe this will give it a jump start.

 

[this1ultraflyz]

Nice for sure hows it run?

 

[Rrrrrrandyw]

Love it, just switched from a custom wedge chassis with a storm motor, no comparison. Shoulda went the boost route long ago.

 

[jameslynch03]

My 02

What brand of Axel and two wheel kit are you running and what length is your track?

 

[schmitt]

Tank seat combo info?

Looks like the ski doo rev tank and seat combo 'boss" with 04 proxr 440 rider forward parts or a 04 proxr 440 chassi, "front end" with tunnel

I have this tank and seat combo on my trail sled

 

[Volvokvaloya]

Here`s how the sled did become after the prewinter mods,such as polishing the tunell,2 wheel kit,removed the swaybar and mounted the motor push arm...even though you cant see it.

 

[Andreas83]

Took some pictures of my vertical escape this weekend.
-SLP singel pipe
-dual koso egt
-slp powder pro
-boss seat
-162" 2.25" track
-MMP wheels
-avid 7t drivers
-6" riser
-goldfinger
-wrp boards

Hoping to get more parts on it next weekend
-Pro rmk snowflap
-Vent kit
-Adjustebal riser
-SLP head

 

[AirForceSledder]

Here's mine....not super custom but pull and go! Can't go wrong with the raw power of these 800 Edges...even though they are "old Skool"

 

[2XM3]

Well heres mine, carbon fibre tunnel,hood, trailing arms,titanium bolts,162-16 3 inch track,avid case, zeropro shocks, tcp a-arms for 11 inch travel, boss seat, fabcraft skid,fabcraft steering post,every possible thing done to shave weight, just over 400 lbs, running a slp 903 stroker race gas 210 hp old girl runs pretty good

 

[Spaarky]

That is one beautiful sled!!!!!!!!!!!

 

[2XM3]

thank you !! i tried to make it as clean looking as possible.

 

[X2Freeride]

04 PRO XR 440 800 I built over the summer.

 

[trabes12]

sled

I'll start...04 with Struthers & Indy Dan motor setup, Timber sled rear skid, floats all around, a 162 camo with 2.5 paddles and lot's of little things that add up money but minus the weight. Let's see yours.

hey just wondering were you got your boss seat from/ that is a very nice sled, nice job!

 

[Ryanlilly]

Here is mine...

But it's being tore apart again. I picked up a turbo kit for it, and 159 crazy mtn extreme rear skid, along with a Van Aumburg boondocker bumper kit and lots of powder coating to do.

 

[kessinger700rmk]

03 700 RMK 6,800 MILES