Just curious..got any pics of them installed? and any idea what they weigh? Not that I want to buy any..just curious is all, thanks..Mike
Footwell Tunnel Brace
- Thread starter TGitt
- Start date
When is spoke to FTX thats exactly what they said, preventative. not a fix for already damaged.
Does anybody know if this is a problem on the SBA as well? Lots of rocks, logs and stumps where we ride at home.
Would the braces for the RMK work on a SBA?
Would the braces for the RMK work on a SBA?
T
Tedd
Well-known member
I will have to get photos of them installed in the morning. The weight is minimal, I will weigh them in the morning as well.
T
Tedd
Well-known member
Sorry guys, can't get really good pictures since the sled is buried in the show trailer ready to leave for Salt Lake tomorrow afternoon. I will get these photos for you this weekend at the Salt Lake Snow Show. If you happen to be coming to the show, be sure to stop by and say hello.
slightly tweaked left side footwell options?
My tunnel is slightly tweaked on the left side footwell. I think I can drop the skid and possibly straighten its that minor but I'm wondering if the kmod vs. Fastrax kit would be a better option for me afterwards. I realize the kits are preventative not after damage but wanted some feedback on if its nearly straight either will work or because of the size of the kmod there would be more structural support vs. Fastrax etc. Looking to tunnel and footwell braces at this point. I have an 11 pro.
My tunnel is slightly tweaked on the left side footwell. I think I can drop the skid and possibly straighten its that minor but I'm wondering if the kmod vs. Fastrax kit would be a better option for me afterwards. I realize the kits are preventative not after damage but wanted some feedback on if its nearly straight either will work or because of the size of the kmod there would be more structural support vs. Fastrax etc. Looking to tunnel and footwell braces at this point. I have an 11 pro.
G
geo
Well-known member
Does anyone have pictures of a bent tunnel like this with the tank off? Trying to picture in my mind what else is weak (weakest link) to allow this fairly triangulated area to fold like that.
While I'm asking, does anyone have a picture of the rear mount bent (hopefully with tank and seat removed)? There is not much help from the structural heatexchanger corners on this tunnel. Only one rivet every 8" or so.
I'm coupling the suspension so I want to be sure of how to re-inforce the tunnel in these two points and I like to think things out before just riveting on a plate or three.
One more question lol. Has the '13 been an issue with the extruded foot boards and new coolers?
While I'm asking, does anyone have a picture of the rear mount bent (hopefully with tank and seat removed)? There is not much help from the structural heatexchanger corners on this tunnel. Only one rivet every 8" or so.
I'm coupling the suspension so I want to be sure of how to re-inforce the tunnel in these two points and I like to think things out before just riveting on a plate or three.
One more question lol. Has the '13 been an issue with the extruded foot boards and new coolers?
Last edited:
X2!!
would the coupling stress be related to the buckling between the front suspension mount and bulkhead.... ?
G
geo
Well-known member
I'm trying the Timbersled add on rear arm for some coupling available when the snow asks for it.
Been playing with this skid for a long time and I wanted to try something new. Even giving the EVO airs 3 lol a try again. Ordered up in Aug. (hope they come soon 'cause the snow is here, yeehaw!) because I wanted to spend my building time on HP.
I'm doing my own bracing because I have a weight goal with this sled (and I like to build lol).
There are some nice products out there but I see too much steel and thickness for me and not enough "engineering" and focus on weight. So I'm adding structure with bends and using glue and 1/8" aluminum rivets in more of an aircraft pattern.
I've seen some great pics of the front tunnel weakness (like it was planned, 3 holes in a row making an 8" plate into 3 2.5" sections lol) but none of the rear mount area. Any body have some pics of a bent rear section from suspension bottoming.
Been playing with this skid for a long time and I wanted to try something new. Even giving the EVO airs 3 lol a try again. Ordered up in Aug. (hope they come soon 'cause the snow is here, yeehaw!) because I wanted to spend my building time on HP.
I'm doing my own bracing because I have a weight goal with this sled (and I like to build lol).
There are some nice products out there but I see too much steel and thickness for me and not enough "engineering" and focus on weight. So I'm adding structure with bends and using glue and 1/8" aluminum rivets in more of an aircraft pattern.
I've seen some great pics of the front tunnel weakness (like it was planned, 3 holes in a row making an 8" plate into 3 2.5" sections lol) but none of the rear mount area. Any body have some pics of a bent rear section from suspension bottoming.
Last edited:
Bent from bottoming. Sorry for the bad rating, wrong button
Q-lock
These protector plates look like just what I need to add to my tunnel after I straighten the slight bend on the clutch side, the question I have is mine is a pro assault and I know the outside braces will fit what about the ones for inside he tunnel considering the assault has a but more inside brace off the track arm?
