It should. The new boards appear to be the same extrusion just with different machining.
FACTORY AXYS RUNNING BOARD INSTALLATION ON MY PRO-RMK.
- Thread starter Sheetmetalfab
- Start date
It should. The new boards appear to be the same extrusion just with different machining.
1. Inside the tunnel the hanger/brace is aluminum, the out side piece of the hanger is steel
Still need to tuck and pull the plastic in.
End result
Stock height bars now fit great.
I'm 6'2" and the bar height is perfect.
Sled is ready to be dropped off a cliff.
Bombproof
Last edited:
I welded two 1/4" side plates to a bent 1/8" center piece that hits the two outside rivets.
If i was just using a piece of angle I think 1/4" would be required.
After the gussets are cut off the stock drop brackets and the tunnel is cut up 2" you can see just how weak the remains are.
As I said in the first post.
This is a buddies sled, i have ridden with him once and he really likes the sled.
However his last sled was a dragon and he never rode this sled with stock boards.
I haven't stopped shredding around on my axys long enough to want to ride his pro.
I'll try it out and compare to another similar pro soon.
https://vimeo.com/147052685
There it is.
We are getting a lot of snow up north so the sleds should get a workout.
This webcam showed 2' on the 19th.
Last edited:
In the pictures the inner layer of the drop brackets was never removed.
The holes are in the stock location
The holes are in the stock location
It is in the same spot. But the running boards are raised which make the drop down longer
Sent from my SM-G900V using Tapatalk
SMF....
Wondering if you/friend has any longer term impressions of these raised boards?
.
Wondering if you/friend has any longer term impressions of these raised boards?
.
They worked just like you might think they would.
Lets you stick to a sidehill better without washing out from the running boards pushing you off the hill.
Sled blew up 2 rides later. (Like all 2011 pro’s)
I bought it later that next summer when he broke his leg and needed money.
Rebuilt it and sold it.
Someone running around alaska has it.
Sheetmetalfab, can you share a drawing with dimensions of the overlays you fabbed?
B
Blancheeron
Banned
The point of the elevated boards is to keep them out of the snow... for one... which yours will do better than stock when trenching to a degree.
Sorry no drawings.
I just traced the tunnel.
