Electrical problem???

[FriscoProx]

Having some big time electrical problems with the T-Nytro. 2008 Nytro MTX with Impulse turbo. Ran well last two months. About three rides ago I noticed was it start to idle very erratically but still ride-able with idle turned up 1750-2000 (it did throw a code 37 for what I'm assuming is the high idle). Last ride right after it warmed up it died. It would fire up and sound fine than immediately die (something is cutting out the spark). It did throw a TORS code but only for a couple seconds. Now all I get is everything flashing and clicking really really quickly and it won't turn over (plenty of battery). I took a quick look at the easy stuff and don't have any loose wiring. Any ideas before I dig in?

 

[Motleyone]

Hey Frisco,

Are you running the original Impluse setup with the Pure Logic and Prologger? Did you wire it up yourself? Have you cleared all your codes then tried to start it again? It stores old codes even if they came on for a second. Need to know exactly what code is throwing. Did you adjust your idle screw on the throttle body? Have you messed with the CO trim in the ECU? Have you checked your TPS parameters? Have you checked all your fuses? Have you checked to feel if your relays are actuating? Not sure of your mechanical abilities so I am throwing everything at ya.


Motleyone