Thanks Backcountry! I'm going to try to get this done this weekend. I'll post how it works out.
Does the GEOMOD work on 2010 m8?
- Thread starter elvis1280
- Start date
geo typed: Nothing beats a revalve for ride. The Burant kit really works in stock positions (better than anything I've tried yet anyway) and a good deal.
To do the mod you WILL need a softer middle spring set-up (look up dual spring set-up from Holz, the best all round for powder or trail, or find a M-7 spring for powder only). On the Holz spring set you need to have a .9 inch cross over point or it will still act too stiff in powder, he sends it at .65".
anyone know where or how i can get a .9 crossover dual rate spring for the front zero pro shock on the rear skid?
i have ordered float2's for the front ski shocks, and i have the burandt kit on the way (local shock guy is going to upgrade my skid shocks). was hoping to add the dual rate spring and see if i can get the best of what is available. i do have a couple calls into matt at holz but no responses yet.
looking for a more trail compliant, less harsh ride, lighter steering effort (less ski pressure) for my M8. ski
To do the mod you WILL need a softer middle spring set-up (look up dual spring set-up from Holz, the best all round for powder or trail, or find a M-7 spring for powder only). On the Holz spring set you need to have a .9 inch cross over point or it will still act too stiff in powder, he sends it at .65".
anyone know where or how i can get a .9 crossover dual rate spring for the front zero pro shock on the rear skid?
i have ordered float2's for the front ski shocks, and i have the burandt kit on the way (local shock guy is going to upgrade my skid shocks). was hoping to add the dual rate spring and see if i can get the best of what is available. i do have a couple calls into matt at holz but no responses yet.
looking for a more trail compliant, less harsh ride, lighter steering effort (less ski pressure) for my M8. ski
still wondering....
C
Crusty82
Member
Is there anybody here that have done the geo mod on 2010mod m8?
How did it work out and what is the measurements on the stop location?
Do it ad more ski lift?
I also didn`t really understand the measurements geo said on the upper.
"top mount center location is 11.4 mm from front edge and same distance from bottom of bend on the mount."
Maybe it`s my norwegian english that don`t transelate well enough
How did it work out and what is the measurements on the stop location?
Do it ad more ski lift?
I also didn`t really understand the measurements geo said on the upper.
"top mount center location is 11.4 mm from front edge and same distance from bottom of bend on the mount."
Maybe it`s my norwegian english that don`t transelate well enough
There was a tread on here with pics, I'd do a search. There's going to be about 50 threads asking about it, maybe there is a link in one of them.
When he first did it, he posted some pics with measurements, they make it pretty obvious.
When he first did it, he posted some pics with measurements, they make it pretty obvious.
there are a few pics and descriptions of the 08 and previous m sleds for the geo mod but, no one has posted pics, on the how to of the 09-10 swisscheese rails. and yes the measurements could be alittle clearer for the avg joe. really appreciate the time and offort it took to find this, just wanting to make sure i am not going to drill wrong and mess something up.
on a side note, i bought float2's for the front of my 09 m8, i ordered the burandt kit for the rear shocks, and ordered the holz dual stage spring set up for my weight and burandt valving for the center shock. once i have it all and installed and rode on, i will post an update. ski
on a side note, i bought float2's for the front of my 09 m8, i ordered the burandt kit for the rear shocks, and ordered the holz dual stage spring set up for my weight and burandt valving for the center shock. once i have it all and installed and rode on, i will post an update. ski
