Colorado For Sale, want to buy, jobs and services
- Thread starter PJ-Hunter
- Start date
add has been pulled, sold? what color is it? pics?
we must have different toys...not hauling much with that
That would haul a small 2 place open with sleds or ATVs or a dirt bike trailer. I've seen several med. sized SUVS pull that. Now yanking an enclosed I wouldn't even try.
2005 M7 low miles mods and new Maverick 15x162 track
I am going to trade in my 2005 M7 162 next week at a dealer, not going to get a much for a bunch of mods. Under 1000 miles, RKT head and porting, speedwerks single and can, boondockers box, altitude timing key, ceramic rotor, Holtz rear suspension kit. $5000
also new 15x162 Maverick $400
I will be in CO next week
I am going to trade in my 2005 M7 162 next week at a dealer, not going to get a much for a bunch of mods. Under 1000 miles, RKT head and porting, speedwerks single and can, boondockers box, altitude timing key, ceramic rotor, Holtz rear suspension kit. $5000
also new 15x162 Maverick $400
I will be in CO next week
for sale 09 m8 sp 162
mint 1900 miles slp pipe $7000 skid perf. seat $200, slp pp ski $250 call jack 1-970-214-2410
mint 1900 miles slp pipe $7000 skid perf. seat $200, slp pp ski $250 call jack 1-970-214-2410
C
CO_MapMaker
Well-known member
Jack C. - Joe's buddy???
If so, do you want to sell the SLP pipe & can seperate??
Rob
If so, do you want to sell the SLP pipe & can seperate??
Rob
R
Rammit
Member
parting out 2001 RMK 800
everything but track
Bottom end seems good to me, but cant guarantee anything, just blew apart a ring so pistons and cylinders are junk
ive got chaincase 39t and 20t gears
good hood and windshield- red snowcheck
front suspension parts, fox shocks
a few cylinderheads ves and non VES
tunnel extension with cooler-50$
side coolers 60$ fer the pair
carbs-125
primary and secondary clutches- set up perfect
driveshaft and bearing
brake caliper and rotor
pretty much anything from the chassis you need i have all plastic is good, tub is a lil bent next to secondary
s2000 skidoo parts- under-coolers from a 1997 summit 670
670 fuel pump
670 crank
670 head
everything but track
Bottom end seems good to me, but cant guarantee anything, just blew apart a ring so pistons and cylinders are junk
ive got chaincase 39t and 20t gears
good hood and windshield- red snowcheck
front suspension parts, fox shocks
a few cylinderheads ves and non VES
tunnel extension with cooler-50$
side coolers 60$ fer the pair
carbs-125
primary and secondary clutches- set up perfect
driveshaft and bearing
brake caliper and rotor
pretty much anything from the chassis you need i have all plastic is good, tub is a lil bent next to secondary
s2000 skidoo parts- under-coolers from a 1997 summit 670
670 fuel pump
670 crank
670 head
Last edited:
WTB: 155" Polaris 5.1 track Will consider any mountain/powder 155 track that will fit my Assault
Also looking for the OEM Polaris Bar hooks.
Also looking for the OEM Polaris Bar hooks.
WTB: Polaris IQ800 Airbox or shelf
EDIT: Found one!
EDIT: Found one!
Last edited:
M7 belt and rmk belt
NEW drive belt for an 06 Arctic Cat M7, will work with other years and models like an M8 $70.00, also Polaris drive belt off an 04 RMK. Belt # 3211080, 2 available, one new and one slightly used. 80.00 for both. located in eagle.
NEW drive belt for an 06 Arctic Cat M7, will work with other years and models like an M8 $70.00, also Polaris drive belt off an 04 RMK. Belt # 3211080, 2 available, one new and one slightly used. 80.00 for both. located in eagle.
153
I have an almost new 153" Camoplast 2.25" x 15" snowmobile track. It came off my 2008 Nytro two summers ago and been stored cool and dry since. Its in excellent shape, no cracks or tears on track or paddles. I also have the 153" stock nytro suspension, it needs the 4 mounting bolts but ready to bolt on your long track project. Will sell both for $300. Both are located in Georgetown but could meet in Denver or Summit county or the Saturday of the snow show.
Mike
I have an almost new 153" Camoplast 2.25" x 15" snowmobile track. It came off my 2008 Nytro two summers ago and been stored cool and dry since. Its in excellent shape, no cracks or tears on track or paddles. I also have the 153" stock nytro suspension, it needs the 4 mounting bolts but ready to bolt on your long track project. Will sell both for $300. Both are located in Georgetown but could meet in Denver or Summit county or the Saturday of the snow show.
Mike
Polaris Clutch Puller, RMK Red Bumper, Nytro Radiator
Cleaning out the garage. Have a used 4-5 times P-85 Polaris clutch puller in great shape, threads nice and clean. Also have a brand new RMK red rear bumper that bought for a project and never used. Lasty, have used a Yamaha Nytro radiator. Located in Georgetown but in Denver and Summit Counties a couple times a week each.
RMK Bumper $10
Polaris Clutch Puller 2000-2010 $20
Yamaha Radiator $50 obo
Mike
Cleaning out the garage. Have a used 4-5 times P-85 Polaris clutch puller in great shape, threads nice and clean. Also have a brand new RMK red rear bumper that bought for a project and never used. Lasty, have used a Yamaha Nytro radiator. Located in Georgetown but in Denver and Summit Counties a couple times a week each.
RMK Bumper $10
Polaris Clutch Puller 2000-2010 $20
Yamaha Radiator $50 obo
Mike
I'll take that clutch puller. Going through Georgetown today, as well as this Friday (actually every Friday).
XP parts at Denver expo
I have a Tunnel in good shape from a 2009 XP 800R 146" track. My Buddy purchased the sled from an insurance company to pull the 800 motor out and most of the other parts. The sled was damaged in the s- module so the tunnel itself was not damaged. Let me know if you are interested or have any questions.
I also have a bunch of plastic off an 08 rev xp everest 800; side pannels, skid plates yellow), hood (has some scratches), etc
I am looking to get rid of this Saturday at the Snowmobile Expo in Denver. I will only be there for a few hours just cruising with the parts locked up in my truck- call if you are interested
Call Brent (970) 485-0822
I have a Tunnel in good shape from a 2009 XP 800R 146" track. My Buddy purchased the sled from an insurance company to pull the 800 motor out and most of the other parts. The sled was damaged in the s- module so the tunnel itself was not damaged. Let me know if you are interested or have any questions.
I also have a bunch of plastic off an 08 rev xp everest 800; side pannels, skid plates yellow), hood (has some scratches), etc
I am looking to get rid of this Saturday at the Snowmobile Expo in Denver. I will only be there for a few hours just cruising with the parts locked up in my truck- call if you are interested
Call Brent (970) 485-0822
