Colorado For Sale, want to buy, jobs and services
- Thread starter PJ-Hunter
- Start date
Bump. Need to sell this stuff ASAP so make me an offer please.
M
monster967
Member
Need to find a rev track 144 x 16 x 2.25.
Edge parts for sale>>
I have the following Edge parts for sale or trade for IQ parts...
------------------------------------------------------------
>very nice red hood with headlight, tach, and speedo with about 1500 miles on it
>1 pair of new in pkg Woody's "shaper" bar carbides for Edge skis
>1 pair of red Acerbis hand guards with Edge mounts
>red 11" Polaris windshield
>1 pair of new Polaris hyfax for a mountain sled...white
>SLP powder filters for rear of hood with frames..new in pkg
>1 pair of bogie wheels, black solid with all mounting hardware
I think that's all... Make me an offer on anything....
I have the following Edge parts for sale or trade for IQ parts...
------------------------------------------------------------
>very nice red hood with headlight, tach, and speedo with about 1500 miles on it
>1 pair of new in pkg Woody's "shaper" bar carbides for Edge skis
>1 pair of red Acerbis hand guards with Edge mounts
>red 11" Polaris windshield
>1 pair of new Polaris hyfax for a mountain sled...white
>SLP powder filters for rear of hood with frames..new in pkg
>1 pair of bogie wheels, black solid with all mounting hardware
I think that's all... Make me an offer on anything....
T
thechuckwagon
New member
WTB Rev XP seat, M7 skid, maybe a 16" track.... gotta shave some weight off of the RX1
cat 900 parts, oil, M7 billet BB and m7 pipes
mtn cat 900 speedwerk single pipe and the thing can-350
Peak billet head
1m 900 or 975 bb(m1K piston swap)have domes for both-200
4 gallons of unopened Klotz R50 premix oil- 25ea or all for -80
m7 slp twin pipes and slp can-350
EngineTech 900 billet big bore cylinders and ET billet head-1000
1m titainium rear springs-100
1m stock seat, skis, oil tank pump and fuel pump, stock 1m carbs, airbox, kickass filters, 1m stock front and rear springs, PPP can., stock windshield
can send pics. in denver russell3571@gmail.com
mtn cat 900 speedwerk single pipe and the thing can-350
Peak billet head
1m 900 or 975 bb(m1K piston swap)have domes for both-200
4 gallons of unopened Klotz R50 premix oil- 25ea or all for -80
m7 slp twin pipes and slp can-350
EngineTech 900 billet big bore cylinders and ET billet head-1000
1m titainium rear springs-100
1m stock seat, skis, oil tank pump and fuel pump, stock 1m carbs, airbox, kickass filters, 1m stock front and rear springs, PPP can., stock windshield
can send pics. in denver russell3571@gmail.com
new turbo
Also have a new in the box never used Mitsu evo3 big16g turbo. was a spare for my turbo 900 cat but never used it. Genuine mitsubishi not a cheap ebay or china copy. in denver. Paid over 600 plus tax, and ship. $550
Also have a new in the box never used Mitsu evo3 big16g turbo. was a spare for my turbo 900 cat but never used it. Genuine mitsubishi not a cheap ebay or china copy. in denver. Paid over 600 plus tax, and ship. $550
I have a bunch of stuff I don't need that I'd like to get rid of:
New set of skags (in the plastic) for a old style Summit REV
8" stock riser (XP)
low profile windshield (XP) SOLD
TEAM secondary springs (red/blk, red/dark blue and red/pink)
Idler wheels (XP)
Black hood (XP)
2 stock cans (XP)
secondary (Summit 670)
Dakine 30l backpack SOLD
Ford SuperDuty Chrome bumper (stock for 1999-2004) SOLD
Just ask for pics and I'll do what I can to get ya some.
New set of skags (in the plastic) for a old style Summit REV
8" stock riser (XP)
low profile windshield (XP) SOLD
TEAM secondary springs (red/blk, red/dark blue and red/pink)
Idler wheels (XP)
Black hood (XP)
2 stock cans (XP)
secondary (Summit 670)
Dakine 30l backpack SOLD
Ford SuperDuty Chrome bumper (stock for 1999-2004) SOLD
Just ask for pics and I'll do what I can to get ya some.
Jaws for M7
Jaws twin pipes for M7. Great shape, fresh paint, new exhaust flanges. These pipes will give your M7 a good kick in the azz
(Boondocker box and EGT's not included, but recommended). A tad bit loud for the greenies
of course, but if medium loud twins ain't a problem, here ya go. Almost free to a good home...well, half price anyway
I moved to a high comp, ported, bmp 800 and couldn't keep them tuned for long, so I give up and run their single. These pipes do have a removeable restrictor that should let them run on an M8 at altitude (according to Jaws-Brian). I removed them but it was a no go with the modded 8 I had, but I bet they'd run good on a stock 8. With a BD box and EGT's they were fairly easy to tune on the M7, and once tuned, never needed any more fiddling for 2 years.
If interested, PM me. As a free basic member I can't actually see this far into the thread so I won't see your response
Jaws twin pipes for M7. Great shape, fresh paint, new exhaust flanges. These pipes will give your M7 a good kick in the azz
(Boondocker box and EGT's not included, but recommended). A tad bit loud for the greenies of course, but if medium loud twins ain't a problem, here ya go. Almost free to a good home...well, half price anywayI moved to a high comp, ported, bmp 800 and couldn't keep them tuned for long, so I give up and run their single. These pipes do have a removeable restrictor that should let them run on an M8 at altitude (according to Jaws-Brian). I removed them but it was a no go with the modded 8 I had, but I bet they'd run good on a stock 8. With a BD box and EGT's they were fairly easy to tune on the M7, and once tuned, never needed any more fiddling for 2 years.
If interested, PM me. As a free basic member I can't actually see this far into the thread so I won't see your response
FS: 07' Polaris RMK 600HO/144" w/mods - $4199
For sale: 2007 Polaris 600 RMK with a 144" track and electronic reverse. This sled is in great condition and has many extra parts like an SLP pipe and SLP can combo, SLP air box modification, 2Cool side vents, full set of HRP and SLP rear hood vents and dash vents to improve intake flow, Slidekicks ice scratchers, Polaris hand guards, Polaris skid plate, Polaris tether switch, Snoskinz full seat cover, Snoskinz headlight knob cover, rear small LED tail light, Polaris handlebar riser, custom trimmed windshield, BetterBoards running boards, RydeFX clicker shock w/reservoir at rear skid position, RydeFX aluminum coil-over at front of rear skid, billet aluminum idler wheels(not pictured--just added), and its all black with no decals. This sled starts fast and runs great and is so easy to ride in the powder and trees.. According to SLP, its putting out 130HP so it can run with most sleds. It has about 2700 miles on it, but it spent most of its life touring WY, MT, and ID before I bought it last year, so the track is like new. Will trade toward another sled, like an Assault, an IQR, IQRR, 600RR, a 07' up 700RMK, or any newer Acrtic Cat.. Its set up for 8K-11K ft... Email for more photos. Thanks for looking! rusbyps@aol.com
[/IMG]
[/IMG]
For sale: 2007 Polaris 600 RMK with a 144" track and electronic reverse. This sled is in great condition and has many extra parts like an SLP pipe and SLP can combo, SLP air box modification, 2Cool side vents, full set of HRP and SLP rear hood vents and dash vents to improve intake flow, Slidekicks ice scratchers, Polaris hand guards, Polaris skid plate, Polaris tether switch, Snoskinz full seat cover, Snoskinz headlight knob cover, rear small LED tail light, Polaris handlebar riser, custom trimmed windshield, BetterBoards running boards, RydeFX clicker shock w/reservoir at rear skid position, RydeFX aluminum coil-over at front of rear skid, billet aluminum idler wheels(not pictured--just added), and its all black with no decals. This sled starts fast and runs great and is so easy to ride in the powder and trees.. According to SLP, its putting out 130HP so it can run with most sleds. It has about 2700 miles on it, but it spent most of its life touring WY, MT, and ID before I bought it last year, so the track is like new. Will trade toward another sled, like an Assault, an IQR, IQRR, 600RR, a 07' up 700RMK, or any newer Acrtic Cat.. Its set up for 8K-11K ft... Email for more photos. Thanks for looking! rusbyps@aol.com
Last edited:
RMK 900 Parts...
I have one gates/ napa extreme belt with only 30 easy break in miles on it. Paid 90.00. Will sell for 50.00?
2 bogie wheels, red. Make offer.
Windshield/ windshield parts. Make offer.
Team Gears: 19/42. 60.00 obo.
Chaincase bracket to keep it from leaking. New! 10.00.
Stock springs. Make offer.
2 new spark plugs. BR98ES. Make offer.
I'm in the Breckenridge area.
I have one gates/ napa extreme belt with only 30 easy break in miles on it. Paid 90.00. Will sell for 50.00?
2 bogie wheels, red. Make offer.
Windshield/ windshield parts. Make offer.
Team Gears: 19/42. 60.00 obo.
Chaincase bracket to keep it from leaking. New! 10.00.
Stock springs. Make offer.
2 new spark plugs. BR98ES. Make offer.
I'm in the Breckenridge area.
I have a 99 RMK 700 cylinder. Worked great but does have a scuff on the inside. Can either be replated or used. I saw about 10 PSI less in that cylinder than the other. Sled still ran good with it though.
Also have a 121" track from my IQR that is studded. Track is in rough shape, but all lugs are attached. Some wear holes where the studs are. This is the 14" race track. Would work fine for someone who just needs a track. Make offer.
I also have both upper a-arms and the left side lower a-arm from a 2007 D7. This should work on all IQ sleds from 2005-Present but it is the older sway bar mount.
Also have a 121" track from my IQR that is studded. Track is in rough shape, but all lugs are attached. Some wear holes where the studs are. This is the 14" race track. Would work fine for someone who just needs a track. Make offer.
I also have both upper a-arms and the left side lower a-arm from a 2007 D7. This should work on all IQ sleds from 2005-Present but it is the older sway bar mount.
Last edited:
I have the rear suspension (no shocks) to a 2005 Ski Doo Summit-X (144 if that matters, but I don't think it does).
I also have one BRAND NEW SLP Powder Pro Ski (black) no mounts, carbide or loops.
Make me offers on both. I would actually trade the SLP ski for a Polaris Gripper (OEM IQ ski).
-Gravity Works Left hand throttle as well.
-OEM 1M Cat Reverse kit This is not complete. I have two lower gears, a reverse gear and some idlers. Again make me an offer. PM to find out the tooth count.
I also have one BRAND NEW SLP Powder Pro Ski (black) no mounts, carbide or loops.
Make me offers on both. I would actually trade the SLP ski for a Polaris Gripper (OEM IQ ski).
-Gravity Works Left hand throttle as well.
-OEM 1M Cat Reverse kit This is not complete. I have two lower gears, a reverse gear and some idlers. Again make me an offer. PM to find out the tooth count.
Track is sold still looking for a tunnel Ext.
V
Vailguy
Well-known member
Selling my toy hauler if anyone is interested? 4runner
http://denver.craigslist.org/cto/1676467233.html
http://denver.craigslist.org/cto/1676467233.html
Yeah, me too. I'm looking for a toy hauler/camper.
