Bumper thread

[mountainhorse]

Recap of those available currently.

Fire N Ice (front)
VanAmburg (front and rear)
Skinz Protective Gear (front and rear)
Edgeworks (rear)
Polaris (front)
Arctic Cat M-series 163 trimmed stocker (rear)
BM fabrications (front)
Most Wanted Performance (front and rear)
TriCity Polaris (front)

 

[BGYDOP1]

Skinz Bumper

How much drilling or cutting is required with the skinz bumper, or is it just bolt on? Thanks

 

[mountainhorse]

SPG... Bolt on

I think Sled Solutions has these in stock.

 

[mountainhorse]

MMSports.

It would be cool to see your idea for tying into the bulkhead.

IMO... best not to rivet into the bulkhead casting... but rather use a bolt location on the bottom side.

I like the idea of having it as a bash-bar as well, as long as the load is distributed over a wider area.

 

[xcpolaris]

I am using a WRP on the rear
wr-products.com
Good heavy bumper

 

[cbc24]

I like the last one! I just dont like the idea of going deep into the mountains without the ability to tow another person out.

 

[B&M Fabrications]

We also offer a rear bumper, basic, simple and stronger than the factory.

 

[mmsports]

You will like it then

We have it drawn up looks real good going to be under 3lb looking at 2.2 so far we should have something to look by mid week.It will offer more protection and more support as to not break things if you do tag something.

MMSports.

It would be cool to see your idea for tying into the bulkhead.

IMO... best not to rivet into the bulkhead casting... but rather use a bolt location on the bottom side.

I like the idea of having it as a bash-bar as well, as long as the load is distributed over a wider area.

 

[mountainhorse]

MM... how do you plan on attaching the lower leg to the bulkhead?

It would be great if you could utilize the bolt in the middle bottom of the bulkhead with some sort of "U" bracket aft and some thing that ties into the fwd area without modifying the pan.

That middle bolt is surrounded by a pocket that would give good strength to the junction and distribute load on the bulkhead as well.

Keep up the good work, cant wait to see what you have to offer!

Your cat bumpers look very nicely made.

Do you plan on offering Polaris Red, and the Blue from the Snowchecks?

 

[mmsports]

Yes we plan on using that bolt and stock with extra gussets to help strengthen mounting points. The purpose is to make the mountin strong enough that the bumper bends not the sled and save sled part like the pipe and frame.

Colors you mean cat green or orange will not work ?

Will will stock white,black,blue and red with custom colors on order.

We have it drawn up looks real good going to be under 3lb looking at 2.2 so far we should have something to look by mid week.It will offer more protection and more support as to not break things if you do tag something.

 

[Broskie]

Van Amburg Front Bumper on Pro RMK 2013

Skinz Rear Bumper on Pro RMK 2013

 

[Powderforlife907]

We are distributing the Edge Works bumper now. Ill post installed pics soon as well as some close ups.

The construction is amazing, mil-spec finish on the tube so your hands aren't as prone to slipping off, stout enough to use a snobungie on.

Check of www.feethookers.com for info shortly.

I definitely interested in buying one in the next week or two.

 

[mtbroncrider]

WRP/TCP front

 

[mtbroncrider]

yeah, I screwed up riviting the rubbers under the hood.......they should fit alot better

easy to mount, has closed wings and seems to be alot more stout than the factory........plus the ends are closed off so they wont hook anything

now i just need the red decals (already added red/black vents) and shes ready to shred!

 

[827revdog]

We are distributing the Edge Works bumper now. Ill post installed pics soon as well as some close ups.

The construction is amazing, mil-spec finish on the tube so your hands aren't as prone to slipping off, stout enough to use a snobungie on.

Check of www.feethookers.com for info shortly.

Hey meathooker, does it bolt in the stock holes? Pm me a price.

 

[racerjb]

Fastrax Motorports stills manufactures and sells the Cobe Rear bumper plus they make their own front bumper for the Pro.

www.ftxmotorsports.com

 

[mmsports]

whights?

Any one know the weights?

Recap of those available currently.
WRP/TCP front
Fire N Ice (front)
VanAmburg (front and rear)
Skinz Protective Gear (front and rear)
Edgeworks (rear)
Polaris (front)
Arctic Cat M-series 16 trimmed stocker (rear)
BM fabrications (front)
Most Wanted Performance (front and rear)
TriCity Polaris (front)

 

[Scott]

Got my Skinz installed last night and put 24 miles on it today.

I'm VERY happy with it.




I do like that TCP bumper because it completes the wrap around the ends. Cool.

 

[cbc24]

I just put 40 miles on my machine and rolled it lol ordered a wrp rear bumper was a good day!

 

[meathooker]

played around with the overhead crane tonight!

and this guy:

http://youtu.be/bkL4Th5-EKo

if you have to pull out your buddy with a broken drive belt you need one of these

PM me if you want one!