S
sks rider
Member
As far as i can tell the throttle is adjusted correctly.
Bog above 3/4 throttle.
- Thread starter sks rider
- Start date
i would still be looking at the reeds...is there any lift in the pedals at all?? they should be FLAT on the valve...they can cause these issues for sure.
also, have you replaced the TPS wiring harness?? especially after all the pulling of the wiring to test parts, and setting the TPS..i would be willing to bet the harness is shot, you can get the updated harness for $35 and tap it in to the existing wiring harness and be done with that part at least..
keep us posted bro, and try and stay focused and not frustrated...your hard work WLL pay off.
also, have you replaced the TPS wiring harness?? especially after all the pulling of the wiring to test parts, and setting the TPS..i would be willing to bet the harness is shot, you can get the updated harness for $35 and tap it in to the existing wiring harness and be done with that part at least..
keep us posted bro, and try and stay focused and not frustrated...your hard work WLL pay off.
S
sks rider
Member
Do you have pics of how the reeds SHOULD look? What do you mean by flat on the valve?i would still be looking at the reeds...is there any lift in the pedals at all?? they should be FLAT on the valve...they can cause these issues for sure.
also, have you replaced the TPS wiring harness?? especially after all the pulling of the wiring to test parts, and setting the TPS..i would be willing to bet the harness is shot, you can get the updated harness for $35 and tap it in to the existing wiring harness and be done with that part at least..
keep us posted bro, and try and stay focused and not frustrated...your hard work WLL pay off.
Theres a chance i didnt know what i was looking for. *looks around*
Ill keep you guys posted for sure. Im just wanting to get riding this winter.
Do you have pics of how the reeds SHOULD look? What do you mean by flat on the valve?
Theres a chance i didnt know what i was looking for. *looks around*
Ill keep you guys posted for sure. Im just wanting to get riding this winter.
sorry bud, dont have a pic. basically see if the reeds are completely flat all the way up/down and across the pedal, and look VERY closely for any chips...chips in the pedal are just as bad as a lifted one...
S
sks rider
Member
Man, i cant remember what they looked like now. haha I know there were no chips or cracks though. Ill have to pull it apart tomorrow. Ill also see if i can find a new tps harness.
S
sno_mo_racer
Well-known member
The reason I said might be pistons was because buddy has a new F6 sno pro about 500 miles and was bogging and dying out above a certain high rpm and we figured it was electrical or something couldn't pinpoint after checking tps, ecu, harness and air intake, we couldn't figure it out and had 130/125 psi in cylinders so he flew it out (yep way up north so only way is flying stuff in which cost him $1300 one way for it) and dealer said they found the pistons were the problem and waiting on new ones, no warranty left on it since he took the engine out or mounts off himself to check other stuff. Not sure how they had that high psi since they were no more good, he didn't tell me exactly what was wrong with the pistons. Its happened to an arctic crap so could be a possibility also on yours.
S
sks rider
Member
Umm, you are pushing the reverse button repeatedly? LOL
New Bellows?
S
sks rider
Member
haha no just into reverse and then back into forward with a 5-10 second pause between presses..
S
sks rider
Member
yes.
