M7 problem, Vibration

[mtn_rider08]

On my 2005 M7 153", I was riding and could tell somthing was wrong. It had a rough vibration feeling when i would start to idle to a stop or have the skis turn all the way.I looked at the primary clutch spring and it was broke, fixed that. rode it again, same problem, along with now it sounded like the track was lose. I tightened the track, and now it has the same rough vibration that it had before. The clutches engage at around 3500-4000 RPM's, climbs hills fine.

Its just when I start to slow down and come to a stop, or have the skis turn all the way.

I just wanted to make sure I'm not missing somthing obvious before I take it to the mechanic.

Any ideas?

 

[Msled4me]

The track nubs can rub on the axle where your front skid shock is mounted, causing vibration at slow speeds, especially as your sliders get worn down.

 

[907KB]

Check Your motor mounts. My sled was shakin pretty bad at 3500 on the down rev to idle. All my mounts were ripped.