R
does any one make a single pipe for an M7??
M7 Pipe
- Thread starter Rotors
- Start date
S
I used to run the D&D fat boy single when my m7 was a stocker and it worked really well with a fuel controller.....
BMP makes a good one, like the one for sale in my sig.
Dakota Performance, its the stock pipe, but you'll know the difference!
L
where do I find this pipe?
and what is the gain?
weight? power?
thanks in advance
Levi
M
Trying to get hp with an aftermarket single pipe on an m7 won't work. All you will do loose a little weight. Now twins is a different story.
Use the stock pipe and take off the heat shield to loose some weight (if you want to retain the heat back in the pipe, ceramic coat it), then add a good lightweight aftermarket can like slp for more reduced weight. Then go ride. If you want more power look at a head cut or clutching.
Use the stock pipe and take off the heat shield to loose some weight (if you want to retain the heat back in the pipe, ceramic coat it), then add a good lightweight aftermarket can like slp for more reduced weight. Then go ride. If you want more power look at a head cut or clutching.
