First off I’m not here to bash anybody. I’m super happy with the quality of the bumper as well as the powder coating. Finally after a little more then 13 months I finally got my Khaos 146. Have had a bumper sitting here for quite a while so went to install is tonight. Problem I’m having is the cutouts for the factory rivets aren’t lining up. Weird thing is that it’s really only on the left side. Right side has one spot but the bumper barely touches the rivet and I don’t think it effects the fitment. Looking at the side pieces they aren’t an exact mirror imagine of each other. Which I kinda thought was weird. So I’m wondering if this is the norm. Or is this a manufacturing error, or is something else going on. Also the last 2 holes on each side are about a hole out from actually lining up with the factory holes in the tunnel. I feel like I could get the holes to line up with a little work. But just wanted to check on what other people are seeing. I promise I’m not an idiot lol. I just want to do some investigating before I drill holes in my 20k snowmobile in the wrong spot.