ZBROZ 36" REVIEW

[RoffRider]

It is not a clean burning engine like the CFI or Etec. It does not make EPA requirements.

i bet suzuki engineers build a good motor because they hired a bunch of guys off of a forum and not college grads like polaris has done

 

[jeepin270]

Hey roff, wuts is ur deal with calling people retarded? From reading all your posts, ur the biggest retard I have ever seen on any forum. Ur to cheap to pay to be a member but ur mouth or fingers are full of gold...

 

[RoffRider]

Hey roff, wuts is ur deal with calling people retarded? From reading all your posts, ur the biggest retard I have ever seen on any forum. Ur to cheap to pay to be a member but ur mouth or fingers are full of gold...

from what i remember...thats the first time i ever mentioned retard on this forum...

i want to ask you a few questions...do the engineers at polaris...who have years of experience, and design sleds for a living, most went through college...not know what they are doing?

thats what were arguing here...skibreeze thinks the guys at the polaris drawing board are just a bunch of dumb drunken mn rednecks who cant figure out a light switch

do you think the same?

 

[smokindave]

from what i remember...thats the first time i ever mentioned retard on this forum...

i want to ask you a few questions...do the engineers at polaris...who have years of experience, and design sleds for a living, most went through college...not know what they are doing?

thats what were arguing here...skibreeze thinks the guys at the polaris drawing board are just a bunch of dumb drunken mn rednecks who cant figure out a light switch

do you think the same?

Why would anyone here want to answer your questions for you,you have already formed your opinion to the point of making up what others are posting.
I read the whole thread where you said Skibreeze says the engineers are drunks we'll I could not find that quote.
You need to chill a bit and let the men discuss what the thread is about....

 

[wjl]

Back to topic.
ZBROZ 36" REVIEW
NOT about Engineering

 

[dorning3]

What size bolt(size and length) are you guys using on the bottom of the shock?

 

[wjl]

Z Bros supplies new 10mm bolts and nuts.
You can either drill out the existing shock bushings on the stock 13 shocks or buy the bushings for the 2012 shocks which used a 10mm bolt. About $15 for a set of 4 and save the 13s. (if you ever go back to a 8mm bolt.)
Polaris Part # 5136530 Qty 4 2012 10mm shock bushings

 

[dorning3]

ok thanks ,I better get my box out of the garbage and look for the bolts..