Toby Shepherd Edition Suspension

[TRS]

Stop in at HayDays and check out Toby’s 7 MOD with the TSE.
We are located at BB3.
His 9 mod will be in the BackwoodsBMP booth. Check them out.

 

[PSI 800]

that first pic is a great action shot

 

[shattuck]

I got a full year on this suspension. I really like it on the boost. My first boost was a 155 khaos that was exhausting for me to ride in technical terrain the next year I got a 165 with the 3.25 the 165 was to boring for me. Last summer I cut the 165 tunnel down and went 155 with this suspension. I was initially worried it would be to planted but it wasn’t it was the perfect mix for me I was still able to do bow ties and get ski lift but it was manageable climbing and I didn’t feel like I was more exhausted then when I rode my 9R. It made it a really well balanced sled.

 

[Roundy800]

I thought I would try this suspension this year and was very impressed. I mounted it in my boost and made it more playful and easy to handle and very predictable when climbing. In fact I liked it so much I bought one for my backup sled.

 

[Ridin Ak]

So a Khaos front rear suspension shock with a different shock spring, a pro rear shock and I am guessing a Khaos limiter strap? Looks like a slick set up!

 

[shattuck]

you can run either khaos or Pro shocks no need to change shock springs. Tony does sell a complete package with Zbros shocks too but it isn’t required to change shocks. The key to the kit is the longer front torque arm and moving the drop brackets back.

 

[wonderxc600]

If you buy just the front chromoly torque arm, do you need to buy anything else. Like new mounting brackets or is it just a plug and play, if that's all it is. I think that would be a good combo with my 9" idler wheels

 

[shattuck]

You also need the rear drop brackets too it’s all part of the kit.

 

[TRS]

If you buy just the front chromoly torque arm, do you need to buy anything else. Like new mounting brackets or is it just a plug and play, if that's all it is. I think that would be a good combo with my 9" idler wheels

You will need the rails as well.

 

[gonehuntnpowder]

If you change the rear mounting brackets can you go back to stock suspension without going back to the stock brackets?

 

[TRS]

We do make different drop brackets that accommodate the stock and TSE suspension.