TAPP Clutch Skidoo turbo

[powderlites]

Powder Lites Pre-Season Sale – Get it while it’s HOT!
Order a TAPP Clutch before Sept 30, 2012 and we’ll include a Motor Mount Shim Kit AND a Clutch Brace for FREE - $182 value!
The Clutch Brace will keep the clutches aligned and brace the factory clutch tower down to the engine support. The Motor Mount Shim Kit will achieve proper motor and clutch alignment by eliminating the freeplay on stock PTO motor mounts. You’ll get better belt life and a higher-performance, cooler-running clutch – for FREE!
http://www.powderlites.com
250-836-4422

 

[Matte Murder]

Looked on your site, could not find a price. How muchy it cost?

 

[powderlites]

TAPP Clutch

$1795. for TAPP clutch setup for your turbo Skidoo with Secondary support brace and motor mount shim kit.
We should have new website up very soon.
http://www.powderlites.com
250-836-4422

 

[sledhead_24_7]

That is for a 800 turbo or non turbo 800 right? Or is it for the 1200 4 stroke?
I know last year it was pretty much 4 stroke only, at least I'm pretty sure.

 

[powderlites]

TAPP Clutch Sale

Yes only 4 stroke has brace and motor mount shim kit.
Check out new website!www.powderlites.com
250-836-4422

 

[sledhead_24_7]

Yes only 4 stroke has brace and motor mount shim kit.
Check out new website!www.powderlites.com
250-836-4422

What I meant with my previous question was if the clutch was available for the
800's yet? Because the tappers are different, I am pretty sure anyway??

Sorry for the confusion.

 

[powderlites]

TAPP Clutch

OK ! So we have tested TAPP on 2 stroke 800 sleds and have electric start inner sheave.
www.powderlites.com
250-836-4422

 

[powderlites]

TAPP Clutch sale

Thanks to all that bought a TAPP Clutch.

sale ends this weekend.
powderlites.com
250-836-4422

 

[powderlites]

TAPP Clutch

There is always little things being upgraded to make it a better longer lasting clutch. First part was button material and then clearances for orings and tighter spider.

The diameter was increased to 8.25 The rebuild kit comes with updated stainless pins as old ones could rust if sled was trailered in salt conditions.

Cover has new logo and a small change in how tight it fits.

We have guys with over 8000 miles and no parts required yet but always good to check over at the end of season and make sure they are cleaned and ready for next year.

Anyone with stainless split pins in ramps should be upgraded to the new Zing plated spring steel pins.

Give us a call if you have any questions. 250-836-4422
powderlites.com

 

[wileybird]

OK ! So we have tested TAPP on 2 stroke 800 sleds and have electric start inner sheave.
www.powderlites.com
250-836-4422

AND..........Do they work good on an 800 e-tech? little more info for the 800 two stroke guys would help?