Stupid Question on Plug Wires - 2012 800

[reldridg]

I have some rubbing on my plug wires and have been having some run-a-bility issues over the last few rides, particularly a mid range bog.

Since I am not riding this weekend I was hoping to work on these items.

Is there a way to replace the whole plug wire? It seems like the wires go up into the coil, like it is glued in. Any ideas?

Once I get some of the rubbing taken care of then I am going to go through some other items.

Any suggestions would be appreciated.
Thank you.

 

[TCPSOUTH]

SLP has a MSD wire and plug kit part# 37-20 for about $37. After about 1000 miles the stock cap's become worn inside and create alot of soot build up inside the cap and can create bad contact with the plug terminal. MSD caps fit better and don't build up any soot. I have put them on my last 3 Pro's and have worked very well. My 11' had the same bog/cut out problem and this solved it. Stock caps are about $16 each. Hope this helps. Good luck.

 

[dttrusko]

Is there a way to replace the whole plug wire? It seems like the wires go up into the coil, like it is glued in. Any ideas?

The wires unthread counter-clockwise on both the coil and plug cap

 

[reldridg]

Guys thanks for the pointers I unthreaded them and their is a ton of soot in the there they are the originals with a ton of miles on them.

Thanks again.