W
whittaker727
Well-known member
Woke up to 20 below and 15 mph wind....Burrrrr. I'm heading on Friday to get more race fuel, so those of you who were going to wait, now's the time. Let me know what you need.
Spokane Area Riders Snow Report for E. Washington, N. Idaho & W. Montana Post 53,933
- Thread starter Ragged
- Start date
Morning and almost night. Sleep good pimps and ho's, good luck on the turbo Devil.
Only 1.5 weeks or so until I can start cussing and yelling and wrenching on the 700Should I use steel rivets for the drop brackets?
Yes
N
NITROSKIDUDE
Well-known member
HELP I NEED HELP.
I have no heat fan turns on but no FIRE, I NEED FIRE!!!!!!!!!!!
Any help out there. or you all hung over you bastages.
I have no heat fan turns on but no FIRE, I NEED FIRE!!!!!!!!!!!
Any help out there. or you all hung over you bastages.
W
whittaker727
Well-known member
Check you pilot lite. Mine went out for who knows what reason last year and I had to use the trouble shooting diagram on the inside of the furnace, but got her going again. If you can hold on I'll be there Thursday night. Kidding, good luck Shad.
Check to make sure your neighbor didn't sneak over and shut your gas off.
Like whit said, check your pilot.
W
whittaker727
Well-known member
Mikey told me he has new ones in stock.
Since you're working on Sunday Sawyer, couldn't you put some of that extra $$ into a nice XLT or something?
N
NITROSKIDUDE
Well-known member
Yea that is what I am afraid of My unit has a self ignitore and the cover says there is no piolot light. Hope i dont need to wait for a new one????
any other ideas??? or heating guys out there that want to make a lightle side $$$$$$ in the Spokane Vicinity,.
The wifes says she would love to pay someone.
Gots me a fire goin now and the house is sittin at 62 degrees. not toooo bad, I guess i wil see if I can maintaine the temp or hopfully gain in temp. til help arrives.
any other ideas??? or heating guys out there that want to make a lightle side $$$$$$ in the Spokane Vicinity,.
The wifes says she would love to pay someone.
Gots me a fire goin now and the house is sittin at 62 degrees. not toooo bad, I guess i wil see if I can maintaine the temp or hopfully gain in temp. til help arrives.
Check power to the ignitor, check your thermostat. Make sure someone hasn't accidently messed with your thermostat, and put on some clothes and make sure your neighbor didn't shut off your gas, seriously. Its a very fun thing to do when you have been drinking.
Probably already did all this.
I fixed my buddies once. He was painting and removed his thermostat. Put it back on and gorrilla'd the wires and one broke. Took me about an hour to find it and then he told me he had it off.
Probably already did all this.
I fixed my buddies once. He was painting and removed his thermostat. Put it back on and gorrilla'd the wires and one broke. Took me about an hour to find it and then he told me he had it off.
Last edited:
N
NITROSKIDUDE
Well-known member
We areat 63now
S
Sixat38
Well-known member
Nitro, I'd bet it's your hot surface ignighter. Unfortunately it's not something you can buy at HD or Lowes. And sorry I can't hook you up with one. The part is about $15-20 (over priced), and real easy to change, but the service call (charge) will not be pleasant. Every service truck probalby has 10 of them on board. It's a stupid design if you ask me because they wear out after igniting 'X' amount of times. The problem is X could be 20 or 2000.
G
GF2
Member
Shad all the things metioned on here are good to check if you need a reasonable sevice tech call me I have a couple in my phone that work on the side . 509 209 6459
Top what do you have do you have pics Super clamps or regular hold down bars are they allum or steel .
what the best way to get a hold of Moto Mike aside from driving to Spirit Lake
Top what do you have do you have pics Super clamps or regular hold down bars are they allum or steel .
what the best way to get a hold of Moto Mike aside from driving to Spirit Lake
W
whittaker727
Well-known member
J
jaysonfreerider
Well-known member
whats the best thing to cut out the side of your tub to install the modrod vents???
D
DTrip
Member
Fixed it for ya
Seriously...Pulled the directions out, looked at the diagonstic light, it flashed 3times - Pressure switch stuck open...Jumped it - HEAT IS ON...Shad needs a new Pressure Switch. Keep in mind I'm a stupid Plumber - Poop rolls down hill, payday is on friday, hope your house doesnt blow up!!!!
Wonder if anyone actually made a rode ride at Lookout???
N
NITROSKIDUDE
Well-known member
Well the verdict is the pressure switch that activates the ignitor, i can jump it to start it but i am off to Lowes for a new Hopfuly.
Yea i am sure i have touched it OOOOOOOHHHHHH yea i did touch the thermostate last night. Dam I should just leave stuff alone/
Yea i am sure i have touched it OOOOOOOHHHHHH yea i did touch the thermostate last night. Dam I should just leave stuff alone/
Ritter...no $$ gettin spent in the poo this year...just on gas to ride..maybe next year...buy I seem to be saying that too often...lol...BUT...I do have a stock single I think...I'll check...let me know if you still need one.
Jason...I think the twins are off a Gen 2 but I'll find out...they belong to XFL.
I went to the snake to shoot dogs...called in 3 we left with one...I never got a chance to pull the trigger but a great time with beautiful suuny COLD skys.
There are a few flakes of snow falling now...Not as many as one had...man that looked awsome but at least there fallin frozen and not as rain..
Nitro...hope you got heat soon bro!!
Rags
Jason...I think the twins are off a Gen 2 but I'll find out...they belong to XFL.
I went to the snake to shoot dogs...called in 3 we left with one...I never got a chance to pull the trigger but a great time with beautiful suuny COLD skys.
There are a few flakes of snow falling now...Not as many as one had...man that looked awsome but at least there fallin frozen and not as rain..
Nitro...hope you got heat soon bro!!
Rags
Similar threads
