SnoScoot Long Track mod

[volcano buster]

This 98" x 12" x 1.25" track might be just the ticket for a long track mod.

No idea the availability or cost, but when money is no issue...

http://snocobra.com/store/utv-track-lines

 

[couch]

AD Boivin tack (108" x 11.5" x 1.25") was about $500 plus shipping and it had to have windows opened and then clipped.
Timbersled track (121" x 12.5" x 1.75") was $650 plus shipping. Both work great.

 

[volcano buster]

We had about 11-12" of fluff yesterday here at the house. I was breaking in a sledding hill for the kids with the 121" tracked scoot. Not sure the grade of the hill, but probably around 20%. Pulled the grade with me on it (250#) and kept going. It worked real good to pull the kids up and down the street to. I was concerned that it wasn't spinning the track but once I sent the kids in I was able to get a couple good donuts in the street with it.

 

[steve711]

Clutch Bell mod

I remove a few thousands inside the clutch bell ... for a perfect clutch shoes fit

 

[volcano buster]

I remove a few thousands inside the clutch bell ... for a perfect clutch shoes fit

Can you share more information on this? Why is it needed?

 

[steve711]

Can you share more information on this? Why is it needed?

When you take a look closely inside the stock clutch Bell , you'll see where the path shoes touch = uneven
So machining the inside made a more path shoes grip /balance and you gain some few RPM engagement .

 

[steve711]

I do this mod to clutch shoes + more heavier springs
Clutching now @ 4600 RPM , a lot more fun to ride now !!

 

[Thistledoo]

What are u using for springs? Mine is a toilet outta the hole. Stock rpm engagement would be? Like at 4600 how much are u gaining?

Thanks Brendon

 

[steve711]

Snoscoot Mod

Look at this , what you think !! :

http://youtu.be/Lr_d7kOEGH0