Ryde Air 2.0 Shock

[snow4shover]

I was wondering if anyone has tried the Ryde Air 2.0s. I put a set on my 07 Rev 159 and haven't good luck with them. Right now i am running both chambers at max psi according to what i have read on the internet. Still the shock bottoms out on the trail. We also put a set on a 05 RT 1000 and those are the same part number for a rev. We have 20 psi over the max in those chambers and he is having the same problem. Fortunately that gentleman as has Fox evo's so he is running those now and loves them.

If any anyone has any suggest i would sure appreciate them
Thanks

 

[dshover]

Good luck with that Chris!

 

[ttyR2]

Time for a revalve job?

 

[BigRed118]

One of the chambers says not to touch, it is set from the factory with nitrogen. Did you adjust this one also?

 

[groominator]

Bottom out

spell DIET.....................................

 

[stay tuned]

I have a 07 M1000 and at 230 lbs I do not have a problem with them. I started with 80lbs and they were to stiff and dropped to 60lbs.
After market stuff----A arms, intake, rear suspension, seat, clutching, head, exhaust, porting, tunnel extension, 174" ported track, 3" riser, 4 window gauge, boondocker box, M8 gearing, gold finger, side panel vents, clutch vents, intake vents and cheap &%$ hand warmers. As I like to say, stock with some stuff.