rear track shock done

[pulltype_polaris]

I'm told by polaris that you can bugger your clicker shocks by adjusting them. This seems like a major design flaw. Adjustable shocks that you can screw by adjusting them. Any of you shocks guys out there know of how you can damage the clicker needle and valving other than adjusting them because I haven't adjusted mine since I set it a year ago.

 

[mt.aero]

I adjust my WE clickers all the time and have had no issues.

 

[Lorduss]

I adjust my WE clickers all the time and have had no issues.

Ditto, you have an adjustment so you can use it, who ever is telling you this is full of it.

 

[Indy_500]

I have seen a lot of guys on forums blow them out when running them maxed out. With that being said my rear clicker is 10 clicks out of 12, very stiff and no issues 700 miles later.

 

[pulltype_polaris]

Well I'm still not sure of the cause but Cody at WE pulls through again. About 100 bucks or so and I'm good again. New remote reservoir and a lot less then the nearly 700 that polaris wants.