Pro vs. Standard a arms

[bryceraisanen]

The pros r glued and the standards welded. Are they still interchangeable? From a standard 13 800 to a pro 13 800?

 

[Mr.Blizzard]

the way the shock mounts is different

 

[bryceraisanen]

Can it be made to work or is that pretty much a waste of time?

 

[jakey-boy]

Waste of time. The Standard arms are designed to use a 1" longer shock. If you changed both arms and got the different length shocks they would work.

 

[mtncat1]

you may not believe it but the standard arm are much weaker imop.

 

[Danny Dangles]

you may not believe it but the standard arm are much weaker imop.

They let you ride out is the best part, but yes look at the stock 12 arm wrong and they bend, just ride them till you can't turn the ski.

 

[sledcaddie]

If the a-arms don't give, then the bulkhead will?

 

[mtncat1]

If the a-arms don't give, then the bulkhead will?

un fortunately that can be true but the 11 I had bent way to easy.

 

[DLynn]

Aftermarket is the only way to go. I have seen way too many stock arms come apart to say its not an issue. We install K-Mod, Zbroz, and Timbersled arms and the problem is solved. With the 37" K-Mod arms no shock change is required or we use the stock 39" arms also. All makes solve the glue issues. Will any arm bend? Sure will. However at least it wont pull apart at a glue joint. Just my 2 cents.

 

[tdblakes]

are the upper a-arms, spindles, and tie rods interchangeable from 2011-2015?

 

[Murph]

are the upper a-arms, spindles, and tie rods interchangeable from 2011-2015?

Yes. Pro to Pro. RMK to Pro. No problem.

Assault are wider.