Pro handle bar risers.

[Pro-8250]

Anyone have any opinions on handle bar risers for my 2011 Pro?
I want to raise it about three inches. Do I have to do any other mods to make it work?

 

[b_sandgren]

I saw a nice 2" riser block on cr racing. They said stock cables will work with it, no other mods needed. That's the route I'm going

 

[AndrettiDog]

I always thought higher would be better but I soon learned that lowering my bars from stock another inch or so gave much more carving/sidehilling control. Why do you want risers? Are you a tall dude?

 

[friscospices.com]

I thought the same added 3" then realized it was worse, went to 1.5 and now back to stock. Unless you are over 6'2"I would not change them. Much better control seems like when they are higher you get too much leverage and it rolls easy anyway so you end up over correcting constantly.

 

[COP-OUT]

What is the maximum height you can raise the bars with out getting a longer brake line and throttle cables

 

[Steelman]

What is the maximum height you can raise the bars with out getting a longer brake line and throttle cables

Looks like 2" is all you can go, before you have to change things. Blow is a link:

http://www.slp.cc/catalog.cfm?pageID=detail&catalogID=3&catID=25&productID=65

 

[05900]

Went with 1.5 no problems at all took 5 min maybe and it seems perfect. Any riser for polaris should work ( flat/square). They didn't change much as I used one off older sled.
Have kill switch mount if your interested...

 

[shoobear]

I put in a 1" from wildchild
Im tall but have long arms!

 

[ace59]

I'm 6'. 2" rox risers are perfect.

 

[301fury]

I installed a 3inch with no mods. For some people it doesnt help. depends on your riding. I like to ride tall and not humped over my handle bars. That slight bend in the elbows makes for an easy ride.

 

[Pro-8250]

Lot of great info, thanks. I am 6'1" but I must have short arms and short fingers. I am always hunched over while riding standing up which makes for a sore back after a good days ride. Are there adjustable risers? It would be nice to field test (compare) while riding.
Thanks again everyone.
Any of you Snowest fans know of a site like this that deals with the Polaris Razor?

 

[Steelman]

I'm 6' and going to try stock first. Stood on a Buddy's sled and stock felt good, but did not ride it.

 

[Top]

Lot of great info, thanks. I am 6'1" but I must have short arms and short fingers. I am always hunched over while riding standing up which makes for a sore back after a good days ride. Are there adjustable risers? It would be nice to field test (compare) while riding.
Thanks again everyone.
Any of you Snowest fans know of a site like this that deals with the Polaris Razor?

RZRforum.net

 

[stem]

I'm 6'6" and went for the 2" riser, could easy gone for the 3" since cables on mine would fit.
But in my case 2" was perfect.

 

[Super Sled]

I'm about 6 feet and I'm tempted to try an inch or inch and a half riser.