Can somebody post a picture of the shock tower front exhaust from the inside? I am curious if the pipe has the round ring on it like a typical bottom out exhaust. And how much plastic they leave inside the metal support ring.
Picture of your front exhaust
- Thread starter Himark
- Start date
Which motor, which year?
The 2010 800 now has a very different outlet than any previous years. It has a grommet all the way around the exhaust outlet to seal anything from coming in around the outlet. First year for that setup on the 800.
The 2010 800 now has a very different outlet than any previous years. It has a grommet all the way around the exhaust outlet to seal anything from coming in around the outlet. First year for that setup on the 800.
That would be the year. I bought the inner bracket and outter deflector for a 2009 model. I was thinking that ring may have to be there but was unsure on how they did theres.
Had that setup on the 2009 M and CF 1000's as well, and any 1000's that got the update last year got that. I imagine it's cause the stock can on the 800 is now the same as the 1000 can.
post some pics.not the best picture, but i did capture the rubber boot that you were taking about - on my '10 M8. its actually "brown". you can see it - sorta - in my pic. These were pics i had laying around. if you need better ones, let me know.
Midwest, that looks nice with everything polished under the hood. How long did the heat shield on the pipe take?
^ thanks! it took about 
...which translates to about 2.5-3hrs. i did both sides of the shield (top and bottom; not inside and outside) plus the strapping.
...which translates to about 2.5-3hrs. i did both sides of the shield (top and bottom; not inside and outside) plus the strapping.Similar threads
