My season has started 2013 is here!

[edavis0202]

Got a call yesterday from Cam at Taggart’s Motorsports…”Eric, your sleds in and ready to be picked up”. So naturally excited for the unveiling, I run to take delivery. The first thing I can say about Cam, was her customer service. This is their first year getting back into snowmobiles and they have been great to work with, from price to customer service. Really goes to show you how a small town dealer knows how to do business. Any way before picking it up I already had the build in my head, so I got to work last night and this is what I got done.

Started with a wrap from Sledwraps and with the help of Brandon, they laid out my logos. The fit and finish wasn’t the best, I will admit. I had to do a lot more cutting then I planned on. For my first time doing it, I think it turned out well.

This weekend I will be dissembling the spindles, A-arms, seat bracket, bumpers and running boards and send them off to paint and power coat.

As far as power goes, I’ve got a head from PAR and MDS weights, will be installing turbo hopefully by the end of year. Can’t wait to see the snow fly!

 

[Excalibur]

You sure did not waste any time. Looks great!

 

[Zrider]

Ya needs to get a longer bedded truck. LOL!
Good luck with the new ride. Looks good.

 

[Oregonsledder]

Ya needs to get a longer bedded truck. LOL!
Good luck with the new ride. Looks good.

Hey Z, when you picking up your new 13?

 

[snopromod]

Just my opinion, i would rip that wrap off and do a new one..

 

[cb2honk]

That's why they say opinions are like @$$ holes, everybody has one and they all stink.

 

[friscospices.com]

Did you see a white 155 there for me? Mine was supposed to arrive mid month.

 

[edavis0202]

Did you see a white 155 there for me? Mine was supposed to arrive mid month.

This one was transfered from another dealer actually. They had 4-5 163's though.

Cam said more will be arriving next week.

 

[edavis0202]

Just my opinion, i would rip that wrap off and do a new one..

After the pain in the @ss this one was, Im not messing with another one.

 

[cb2honk]

I was going to go through Taggart's, but I had already ordered my sled through another dealer when I found out Taggart's were doing sleds again. I'm soon to have a Taggart in my family, so future business will probably go there.

 

[edavis0202]

I was going to go through Taggart's, but I had already ordered my sled through another dealer when I found out Taggart's were doing sleds again. I'm soon to have a Taggart in my family, so future business will probably go there.

I was very happy with the way Cam does business, straight to the point and honest about everything.

I think dealers out west tend to take advantage of their location at times.

My grandpa always said "dont sh!t in your own backyard"

 

[Scott]

Jealous.

BTW, can you measure the dimensions of these two boxes I've marked off. I'd like to know how big these areas are. Just basic height and width.


I think I've got something that may fit there when my sled comes in.

 

[edavis0202]

Jealous.

BTW, can you measure the dimensions of these two boxes I've marked off. I'd like to know how big these areas are. Just basic height and width.


I think I've got something that may fit there when my sled comes in.

Scott, I did the best I could with eye balling where you wanted measured.

Top box: 22.5"x6"x24"x10"

Bottom box: 25"x11"x19"x7"

I hope this helps!

 

[Scott]

Yes it does. I think I can get my cool sticker on there without getting it done up in a wrap.

MIGHT do that and save a couple hundy.

 

[AKSNOWRIDER]

Yes it does. I think I can get my cool sticker on there without getting it done up in a wrap.

MIGHT do that and save a couple hundy.

I will do it for ya scott with a marker..how hard can it be to write "gumby"...bwahahaha

 

[edavis0202]

Time for some paint and powder coat!

 

[Hurricane Tim]

Did you have to cut the boards off, or do they just unbolt on both ends on the 13's?

 

[blackhillsrmk]

Can you say chubby in a public forum or is that inappropriate. Nice job...still waiting for my 163!!!!!

 

[edavis0202]

Did you have to cut the boards off, or do they just unbolt on both ends on the 13's?

1 - Bolt

Sh!t ton of rivets...

honestly wasnt that bad

 

[edavis0202]

got some of my parts back from paint this morning, couldnt wait to get them on!