Mc Nytro--what Track

[THEPOWDERHOUND]

What Track Should I Put On My Nytro.the Stock Track Is All Curled Back And Doesnt Get Good Trackion With The Turbo.also,guys Are Talking About Useing Apex Springs In The Rear.do They Work .and 1 Last ? Where Can I Get A Pivot Riser For The Bottom Of The Riser .---thanks Jim

 

[bdubs]

challenger extreme. Yami needs to ditch the mavs and start putting these on stock...

save us all the trouble from having to swap it out!

 

[Nikolai]

153x15x2.25 or 156x15x2.5 challenger extreme. The 2100 nm Apex springs will not bottom out like the stockers, and Powermadd makes a nice pivot adapter.

 

[robertyoke]

I stuck the extreme 16X162 under it and it was a huge improvement. then I stuck a mcx turbo on it lol everything I ride now just seems slow unless it has a turbo!

-robert

 

[Ken Climb]

I like the m7 162 X15 track.(The camoplast NOT the attack 20) I feel its the best all around track there is. It doesn't trench like the extreme does in the pow.The 162 will fit right under your stock tunnel. Your other best mod is the timbersled rear skid! Save your money and get one of those! Keeps the front end down but transfers enough to make this skid a must on the nytro! As a bonus you will lose about 40lbs!!!!

 

[PUNISHER]

Here is the pivot riser from Powermadd that will mount between your stock riser and stock steering post to give it a pivoting action and some more height.


Click the link and look for this part number.

http://www.powermadd.com/products/universal-pivot-riser-system.html

PM15400 Universal 3” Pivot Adaptor / Riser $59.95

 

[alrevedup]

I like the m7 162 X15 track.(The camoplast NOT the attack 20) I feel its the best all around track there is. It doesn't trench like the extreme does in the pow.The 162 will fit right under your stock tunnel. Your other best mod is the timbersled rear skid! Save your money and get one of those! Keeps the front end down but transfers enough to make this skid a must on the nytro! As a bonus you will lose about 40lbs!!!!

Kenclimb, I really like the C.E. track and I agree that it is easy to trench, but I feel like it is clutching as much as anything. I have been playing with the primary spring. The blue/white/blue seems to give me the best results. Doesnt hit as hard from the start and does'nt bounce off the rev limiter on top.

Any thoughts?

 

[rednytro]

love my camo X 156 x 15 its wicked you have to be a little careful about trenching but other than that its wicked , i had my sled dialed in at 12 pounds of boost with the stock track to keep the skis down now with the camo x on there its time for a new skid just way too much tracion to keep the front end down

 

[Nytro Dan]

Any buddy having issues with their belt riding low on the secondary? What spring and shim config do you use with a MCX set up at 12lbs Boost.

 

[Snoboner]

Any buddy having issues with their belt riding low on the secondary? What spring and shim config do you use with a MCX set up at 12lbs Boost.

One more time. SHOCKWAVE!!