Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Lowering a Hawk...

Is there any other holes or parts that have to be relocated for shocks ect.i havn't really looked yet. I thought my 503 was high enouph and I'm 6' so i might want to lower the 600 as well

You only have to drill holes for the limiter strap and the uppe shock mounts. Your track will tighten up a little so you may want to readjust that.
 
You only have to drill holes for the limiter strap and the uppe shock mounts. Your track will tighten up a little so you may want to readjust that.

Hey if you need brake pads for the hawk and your in a jam you can steal them off the Duccatti. Some of the Ducatti's run the same pad lol
I know mine does
 
The brembo part # on the back of the hawk brake pad (503 and asumming the 600 is the same) is 07.6949.20 and alot of Ducattis run the same one on the rear .Apparently if the bleeder screw is horizontal with the ground it runs the same wide pad and if it is perpinticular to the ground it uses a narrower one,so I am told by Fred at http://www.yoyodyneti.com/
 
Premium Features



Back
Top