Lightened 08 600 RMK Spindles

[craigvansickle]

I used a hole saw and a die grinder to lighten my spindles. Hardly worth the time but I enjoyed it. Shaved off around half a pound total. If I was dropping off cliffs and such I would not have touched them. I don't ride that hard. The next step is to weld some 4130 a arms and stick some fox float 2s on there. Not till next year. I spent all my allowance for this year!

 

[AKSNOWRIDER]

I used a hole saw and a die grinder to lighten my spindles. Hardly worth the time but I enjoyed it. Shaved off around half a pound total. If I was dropping off cliffs and such I would not have touched them. I don't ride that hard. The next step is to weld some 4130 a arms and stick some fox float 2s on there. Not till next year. I spent all my allowance for this year!

dang craig, now I am gonna have to add that to my list as well...looks good

 

[BigTruck]

Looks very clean!

Maybey I will do that to my 08 600 as well!

Hmmmmmmmmm...

 

[craigvansickle]

Tools

Tools:
Drill
2" , 1 3/8" , 1 1/4" hole saws
Die grinder
1" coarse sanding drum

 

[BigTruck]

Ive got all of those tools ready to go!!

Thanks.


Rob.