HELP:Wiring a Koso EGT, Water, and Tach

[IQmodster]

Installing a Koso EGT, Water Temp and Tach gauge on a '06 IQR. Have the tach left to wire. Not sure which wire to connect the red wire from the gauge to the ? wire on the sled.

I have tried all 5 wires going to the plug. (plug from harness to the hood harnees. (wires; yellow, yellow/red, red, brown, black/white)

EGTs, temp work great.

 

[hudini]

The tach signal wire is the yellow one.

 

[dynofox]

Where did you pick up a 12v hot wire? I'll be installing my KOSO egt gauge and cyberdyne water temp gauge soon on my 600RR.

 

[hudini]

Okay so I got a Koso Tach, the new one I can't remember the name of it. Anyway, the tach does not work anyway I hook it up, to the tach signal wire or even following thier directions by wraping the wire around spark plug or spark plug wire. I can't figure it out and thier directions suck balls.

My old Digitron was way easy, hook the tach signal wire up to the guage and bam!

 

[MNIQR]

Just too bad Digitrons are junk. IMO anyways.
OHHH dont get them wet, oh dont push on the screen too hard....oh **** its broken, send it in. where the ziplock bag to keep it dry so it will work all day...what do you mean you cant see the screen with the bag on it? man up!!

Sorry rant over.

 

[Daggerboat]

Just too bad Digitrons are junk. IMO anyways.
OHHH dont get them wet, oh dont push on the screen too hard....oh **** its broken, send it in. where the ziplock bag to keep it dry so it will work all day...what do you mean you cant see the screen with the bag on it? man up!!

Sorry rant over.

Digitrons aren't junk....I've transfered the same DT-32 from a '95 Phazer to '98 700 RMK to '02 800 RMK to '07 600 RMK