D
I’m writing to see if any of you might be of some help.
A friend of mine had just fried his brake assembly on his 2009 summit. How his assembly locks up is a mystery, possible left his parking brake on.
What I’m looking for is some information (photo’s) of repairing or replacing the disk and assembly. He has access to a shop manual, but were a bit confused by the directions. Additionally, there is a required Skidoo tool to pull the disk from the drive shaft.
Our questions are;
Does replacing the disk require removing the tunnel/slide?
Is this a job better for dealer?
Is there any alternative to the skidoo disk puller?
Thanks for taking the time for reading this post.
BTW, I have look at several forums, and all searches have come empty.
DRZmaui
A friend of mine had just fried his brake assembly on his 2009 summit. How his assembly locks up is a mystery, possible left his parking brake on.
What I’m looking for is some information (photo’s) of repairing or replacing the disk and assembly. He has access to a shop manual, but were a bit confused by the directions. Additionally, there is a required Skidoo tool to pull the disk from the drive shaft.
Our questions are;
Does replacing the disk require removing the tunnel/slide?
Is this a job better for dealer?
Is there any alternative to the skidoo disk puller?
Thanks for taking the time for reading this post.
BTW, I have look at several forums, and all searches have come empty.
DRZmaui
