Fox Zero - Setup

[NewfieBullet1973]

Just got new fox zero pro's from Carl's - heard a few different things on here with regard to setup. My questions are - if I'm riding in mostly powder how much do I tighten the springs on the shocks - also some people say install them upside down - when you say that do you mean with the bodies by the skis and the shaft towards the sled (fat on bottom - skinny on top - LOL)???

Thanks

 

[large52]

Yeah shafts towards the sled, that is the only way they will fit on a 900 and even then I had to do a little grinding on the upper bracket. Cranking them down all just depends on what weight of spring you chose.

 

[behemoth]

Yeah shafts towards the sled, that is the only way they will fit on a 900 and even then I had to do a little grinding on the upper bracket. Cranking them down all just depends on what weight of spring you chose.

arrr ya shooor(in a bad pirate accent ) the swb(granted I do not know about the rmk, but you said the only way they will fit on a 9...and the swb is a 9 ) comes with zero pros mounted with the shafts towards the skis

 

[SixtySevenGT]

120's No Sway Bar

2005 900 166


I thru the Swaybar away, run 120 lbs Front Springs.

I have about 1 inch preload. I weight about 230 dressed.

BACK --

is 225 front Spring / 4.05 Hairpins