For those of you who are thinking of running the Power Claw track on your PRO-RMK

[LoudHandle]

Norway and others,

Note that the actual speed sensor is the same for all PRO's and IQ's (exact same part number, same plug, same pigtail length) so whatever you have on hand should be the right one electrically. You will need to verify the splined inducer is the same also but my guess is that has not changed either.

 

[Norway]

Thanks MH and LH.

I also found this after I posted the Q. Seems like it will work, no LOGICAL reason why poo should change the count for the pickup (pro shaft has nine splines). I will shop around.

On the wahl drivers, like I mentioned the shaft is here with drivers on and will be run. I did measure from tooth to tooth and in deed it did come up a tad short of 3". I have a theory that wahl know a thing or two making these drivers for many years now, and the dynamic situation of a track and drivers in motion could make for a slightly different "real world".

Yes, I read the whole thread and knew the issue in question. But Curt at Ftx did not agree in the end about Wahl- vs. Avid drivers. Having said that I am not even going near the difference of opinion between Ftx and Avid (and I fully expect everyone else to NOT call/write either to ask "don't you see the other guys point?".

Curt and Robbie have been at this for a while and i respect both a lot. This time I bought a good chunk of stuff from Ftx and I'm a repeat customer of theirs. Taking his word and showing some faith! We'll se how that track looks come summer.

And again; THANK YOU for chiming in guys!


Rune

 

[Norway]

Norway...The Wahl drivers don't work well on this track... sure, they will turn the track, but it won't be "right"... for reasons pointed out in this thread.

The 2005 shafts had a "bolt on" speed sensor (as do all the IQ driveshafts) . The newer ones are integral to the shaft. (as you know)

Simple to add and then your speedo will work ( I assume you have a 2011/12 PRO, an assault or Std RMK???)

The speedo trigger wheel is part #20 (PN 5136619 ) in this pic. bolt is #30 (PN 7516733)
If you have access to used parts... easy to remove from a junk sled... and cheap from the dealer. (about $20 US for both)

.

Alright, quick update: If you go my route and get a 2006 driveshaft, be aware that the bearing flange with bolts (triangle shaped bearing support, #29 in MH picture) from the 900 RMK is NOT METRIC LIKE THE PRO RMK PART.

Ask me how I know...

 

[Norway]

Just a little info I happened upon while researching this:

BTW, anybody know the difference between 1590411 and 1590420 ?

From Polarisfiles forum:
Here is the breakdown on Fusion/IQ/Pro-Ride chassis driveshafts and what length of the left external drive wheel spline on the drum is 'missing' (does not have fluting or splines on it)

Driveshaft for IQ chassis.

1590392 2" unusable spline on left side 9T 2.52" pitch (not reinforced) sub to 1590412
1590411 4 1/2" unusable spline on left side 9T 2.52" pitch (reinforced) $442US list
1590412 2" unusable spline on left side 9T 2.52" pitch (reinforced) $350US list
1590420 4" unusable spline on left side 8T 2.8" pitch $448US list
1590432 Hex shaft, mech. drive, 9T 2.52" pitch
1590451 4" unusable spline on left side 8T 2.8" pitch 3 drivers subto 159470
1590452 4" unusable spline on left side 8T 2.8" pitch $448US list
1590461 Pro-Ride Rush splined pickup 8T 2.8" pitch $ ?? US
1590470 4" unusable spline on left side, pickup wheel 8T 2.8" pitch 3 drivers $551 US list
1590474 Hex shaft, pickup wheel 9T 2.52" pitch $ ?? US
1590485 Pro-Ride, splined pickup 9T 2.52" pitch
1590486 Pro-Ride, splined pickup Center External Driver 8T 2.86" pitch
1590498 Hex shaft, splined pickup 9T 2.52" pitch
1590508 Pro-Ride, splined pickup Center External Driver 8T 2.86" pitch Belt Drive
2204274 pickup wheel 9T 2.52" pitch


05 Fusion 900 _2" unusable left spline 1590392
05 RMK 900 _2" unusable left spline 1590392
05 Switchback 900 _2" unusable left spline 1590392
====
06 Classic 700 _4 1/2" unusable left spline 1590411
06 Fusion 600/700/900 _4 1/2" unusable left spline 1590411
06 RMK 600/700/900 _4 1/2" unusable left spline 1590411
06 Switchback 600/900 _4 1/2" unusable left spline 1590411
06 Touring 700 _4 1/2" unusable left spline 1590411
====
06 FST Classic _2" unusable left spline 1590412
06 FST Switchback _2" unusable left spline 1590392
06 FST Touring _2" unusable left spline 1590412
====
07 IQ 600 _4 1/2" unusable left spline 1590411
07 IQ LX 600 _4 1/2" unusable left spline 1590411
07 RMK 600 144 _4 1/2" unusable left spline 1590411
07 RMK 600 155 __4" unusable left spline (2.8" pitch 8 Tooth) 1590420
07 Switchback 600 _4 1/2" unusable left spline 1590411
07 Touring 600 _4 1/2" unusable left spline 1590411
07 Dragon 121 _4 1/2" unusable left spline 1590411
07 Dragon RMK _4" unusable left spline (2.8" pitch 8 Tooth) 1590420
====
07 FST IQ _2" unusable left spline 1590412
07 FST IQ Cruiser _2" unusable left spline 1590412
07 FST IQ LX _2" unusable left spline 1590412
07 FST IQ Switchback _2" unusable left spline 1590412
07 FS/FST IQ Touring _2" unusable left spline 1590412
====
08 600/700 IQ Dragon/ 600 IQ LX /700 IQ _4 1/2" unusable left spline 1590411
08 600 RMK 144/600 RMK SHIFT _4 1/2" unusable left spline 1590411
08 600 RMK 155 ??? 1590452
08 600 Shift ??? 1590432
08 600/700 IQ Switchback _4 1/2" unusable left spline 1590411
08 700 Dragon Switchback _4 1/2" unusable left spline 1590411
08 600 IQ Touring _4 1/2" unusable left spline 1590411
08 700 RMK 155 Early Production _4" unusable left spline (2.8" pitch 8 Tooth) 1590420
08 700 RMK 155 ??? 1590452
08 700 RMK 163 ??? 1590451 3 driver
08 800 Dragon RMK 155/163 ?? 1590451 3 driver
====
08 FST IQ Turbo Dragon_2" unusable left spline 1590412
08 FST IQ Cruiser _2" unusable left spline 1590412
08 FST IQ Turbo LX _2" unusable left spline 1590412
08 FST IQ Turbo Switchback _2" unusable left spline 1590412
08 FS/FST IQ Touring _2" unusable left spline 1590412
====
09 550 IQ Shift _??? 1590432
09 600 IQ Dragon SP/ 600 IQ _4 1/2" unusable left spline 1590411
09 600 RMK SHIFT _4 1/2" unusable left spline 1590411
09 600 RMK 144/155 _4 1/2" unusable left spline 1590411
09 600 IQ Shift _??? 1590432
09 600 IQ Shift 136 _4 1/2" unusable left spline 1590411
09 600 IQ Switchback _4 1/2" unusable left spline 1590411
09 600 IQ Touring _4 1/2" unusable left spline 1590411
09 700 RMK 155 ??? 1590452 2 driver
09 800 Assault RMK 146 ??? 1590451 3 driver
09 800 Dragon SP _4 1/2" unusable left spline 1590411
09 800 Dragon RMK 155/163 ??? 1590470 8 tooth 3 driver
09 800 IQ _4 1/2" unusable left spline 1590411
09 800 RMK Shift 144 _4 1/2" unusable left spline 1590411
09 800 Switchback _4 1/2" unusable left spline 1590411
====
09 IQ Turbo Dragon_2" unusable left spline 1590412
09 IQ Turbo Switchback _2" unusable left spline 1590412
09 FS/FST IQ Touring _2" unusable left spline 1590412
====
10 550 IQ Shift _??? 1590432
10 600 Pro-Ride Rush_??? 1590461
10 600 RMK144/155 _4 1/2" unusable left spline 1590411
10 600 IQ Shift 1590474 Hex shaft
10 600 Dragon Switchback _4 1/2" unusable left spline 1590411
10 600 IQ Switchback 1590474 Hex shaft
10 600 IQ Touring _4 1/2" unusable left spline 1590411
10 700 RMK 155 ??? 1590452 2 driver
10 800 Assault RMK ??? 1590470 8 tooth 3 driver
10 800 RMK 144 _4 1/2" unusable left spline 1590411
10 800 RMK 155 ??? 1590470 8 tooth 3 driver
====
10 IQ Turbo Dragon_2" unusable left spline 1590412
10 IQ Turbo LX_2" unusable left spline 1590412
10 FST IQ Touring_2" unusable left spline 1590412
====
11 600 Rush ??? 1590485
11 600 Rush Pro-R ??? 1590485
11 800 Rush ??? 1590485
11 800 Rush Pro-R ??? 1590485
11 800 RMK ??? 1590486
11 800 Pro RMK ??? 1590486
11 800 RMK Assault ??? 1590486
11 800 Switchback Assault ??? 1590485
====
11 Turbo IQ ??? 2204274
11 Turbo IQ LX ??? 2204274
11 Turbo IQ LXT ??? 2204274
====
12 600 Rush ??? 1590485
12 600 Rush Pro-R ??? 1590485
12 600 Switchback ??? 1590485
12 600 Switchback Adventure ??? 1590485
12 600 Switchback Pro-R ??? 1590485
12 600 RMK 144/155 ??? 1590485 / ??? 1590486
12 600 Pro RMK 155 ??? 1590486
12 800 Rush ??? 1590485
12 800 Rush Pro-R ??? 1590485
12 800 Switchback ??? 1590485
12 800 Switchback Pro-R ??? 1590485
12 800 Switchback Assault ??? 1590485
12 800 RMK 155 ??? 1590486
12 800 Pro RMK 155/163 ??? 1590486
12 800 RMK Assault ??? 1590486
====
12 Turbo IQ ??? 1590485
12 Turbo IQ LX ??? 1590485
12 Turbo IQ LXT ??? 1590485
====
13 600 Indy ??? 1590498
13 600 Rush ??? 1590485
13 600 Rush Pro-R ??? 1590485
13 600 Switchback ??? 1590485
13 600 Switchback Adventure ??? 1590485
13 600 Switchback Pro-R ??? 1590485
13 600 RMK 144/155 ??? 1590485 / ??? 1590486
13 600 Pro RMK 155 ??? 1590508
13 800 Rush ??? 1590485
13 800 Rush Pro-R ??? 1590485
13 800 Switchback ??? 1590485
13 800 Switchback Pro-R ??? 1590485
13 800 Switchback Assault ??? 1590485
13 800 RMK 155 ??? 1590486
13 800 Pro RMK 155/163 ??? 1590508
13 800 RMK Assault ??? 1590486
====
13 Turbo IQ LXT ??? 1590485

TO SUMMARIZE:

The 2" unusable left spline is on:
'05 Fusion All
'06,'07, '08, '09, '10 Four Stroke ALL

All other IQ chassis, will need the special left side external driver wheel that has some of the internal splining removed, so it can go over the part of the drum on the drive axle that does not have splining.

This post has been edited by ExcursionPSD: Nov 28 2012, 04:30 AM

 

[mountainhorse]

Actually, The AVID brand drivers are already set up to accomodate the un-splided section without worries... I've installed them on all of the RMK driveshafts from 2005 through 2014's







.