Feethookers at the Idaho SnoWest Snow Show - BOISE

[meathooker]

Come check us out at the Idaho SnoWest Snowmobile Show!

We'll have our boards on a RSI Racing Sled in the MOD SHOW as well as in the RSI Racing booth to look at, and we'll be offering show specials!

A sample of our boards will be in the out door area as well.

Stop on by!

 

[KAWGRN]

With the lip on the running board edgle you probably fixed the sagging Running board edge ,,,Now if you come up the tunnel a little further and grab the front suspension bolt I would be interested!I have seen several ppro with a little distortion around that area!,,,

 

[Hrt Offroad]

With the lip on the running board edgle you probably fixed the sagging edge ,,,Now if you come up the tunnel a little further and grab the front suspension bolt I would be interested!I have seen several ppro with a little distortion around that area!,,,

I did this exact thing with the Nytro boards that I made...and I incorporated an M-10 mount into them too...worked like a charm...and looked cool too

 

[meathooker]

I did this exact thing with the Nytro boards that I made...and I incorporated an M-10 mount into them too...worked like a charm...and looked cool too

that is beautiful!

 

[lorne1176]

Carl do you have more installed pictures? I'm asking because I'm doing a tunnel bracket to strengthen the tunnel and I want to see if the new board would interfer or not.

 

[meathooker]

Carl do you have more installed pictures? I'm asking because I'm doing a tunnel bracket to strengthen the tunnel and I want to see if the new board would interfer or not.

i will get some more at the snow show tomorrow and post them up.