Fastlane No-Sno Running Boards

[Jeff K]

Installed these last week on both my sleds. The install is very easy and they turned out fantastic. Can't wait to try them out this weekend!

http://www.flaneinc.com/catalog/product_info.php?cPath=37_21&products_id=54

2007 M1000

2009 M8

 

[ARICH]

how is the grip on the 09 nosnos? doesnt look like there is to much traction there.

 

[Jeff K]

I don't have a picture with the traction screws installed. The traction is fantastic. I will get some better pics later this week.

 

[orange06m7]

i have them installed on my 2010 m8, one of the best 150 bucks i have spent on a sled is all i can say.
they work awesome!

 

[mtn mike on boost]

i really like mine, snow does want to build up between tunnel and boards, and along the edge between the rails and the boards.they are the best boards imo.
i found a supplier that carried the same traction screws they provide and added more of them to the boards and to the rails, see in pic's....


sorry boys and girls looks like i cannot post pic's anymore because i am not a premium member. you probably don't need them, but if you want pm me w/ your email and i can send.that is assuming i can still get pm's????


looks like i might have to fork over some $ to these guys

 

[Rms Rydning]

http://stores.homestead.com/williammoore/-strse-84/M-SERIES--FU/Detail.bok

How is this from Mountain Fit Hoods compare to the fastlanes?
Any that have tryed this?

 

[AaronBND]

http://stores.homestead.com/williammoore/-strse-84/M-SERIES--FU/Detail.bok

How is this from Mountain Fit Hoods compare to the fastlanes?
Any that have tryed this?

Look kinda slick to me.

Aaron

 

[snoprojoe]

Best Mod

I installed a set on my m7. Best mod by bar, holds no snow and has very good traction. I will be putting these on all of my next sleds.

 

[BigAir]

http://stores.homestead.com/williammoore/-strse-84/M-SERIES--FU/Detail.bok

How is this from Mountain Fit Hoods compare to the fastlanes?
Any that have tryed this?

I started a thread asking specifically about these boards and got ZERO responses. Must not be very many people running them. I PMed one guy that listed them as a mod and he said he liked them.

Look kinda slick to me.

Aaron

Instead of using screws from the bottom to mount them and traction screws on top like Fastlane is doing, Mountain Fit is using bolts that go all the way through the board to mount them and provide traction at the same time. When they are mounted the nylock nuts are on top of the board to provide traction.

 

[longtrack156]

Instead of using screws from the bottom to mount them and traction screws on top like Fastlane is doing, Mountain Fit is using bolts that go all the way through the board to mount them and provide traction at the same time. When they are mounted the nylock nuts are on top of the board to provide traction.

Thats what I did, good traction, also you don't have to be as fussy cutting the holes initially if you use a router to clean up after.