Deleting Oil Bottle and Pump 800 Rev

[i'llDooit]

Okay look, here is an example of what a oil cable can be used for.....I know, I know it looks like a science experiment......lol

,,,,, aaaaaaaaa whats that?

 

[Mantis]

Just quick question for oil delete owners- I have put block off plate at bottom and am running tube from fitting above it to the small vented oil bottle...my question is the 2 fittings to the right and left of plate-do you just put a length of small tubing to join them together/seal them off ? Thanks in advance.

Graham

 

[AKlowmarker]

Just quick question for oil delete owners- I have put block off plate at bottom and am running tube from fitting above it to the small vented oil bottle...my question is the 2 fittings to the right and left of plate-do you just put a length of small tubing to join them together/seal them off ? Thanks in advance.

Graham

If you are talking about the nipples that were connected to the oil pump, then yes.

 

[Mantis]

Yes, that is exactly what I was asking about- I saw it done that way on another motor but was unsure if was needed or if you could just plug off....I will just do the tube between and keep it simple! Thanks again!

 

[Colby]

Yep I'll second that. Just got done putting this setup together, and I'll have to say it's pretty slick. So tired of using way too much oil!