Light weight rear skid for sale. $450
Removed from a CMX with a 151 track.
Fox float shocks
Chrome molly arms
Very light weight. 40.8 lbs including the tunnel side plates, without slide rails.
This skid has 141 rails. CMX mounts the skid farther back and runs a very loose track with extroverts. I have the measurements from the sled it was removed from and can provide them with purchase. Dimensions are from the driveshaft centerline and the top of the tunnel.
I also can provide mounting instructions from FTX for a 3" pitch 141 track with 8 tooth drivers and 8" rear wheels.
The tunnel mount plates are included but there is a crack by one of the 3 bolt holes so it will need to be repaired, or the plate can be installed farther back and one of the other two forward bolt holes can be used.
I also have a set of 121' rails that I will swap out to use this skid with a 121" track.
I can box it up and ship it if you pay for the ride.
I have pictures but am unable to get them to upload. Pm me with an e mail address and I can send pictures.
Removed from a CMX with a 151 track.
Fox float shocks
Chrome molly arms
Very light weight. 40.8 lbs including the tunnel side plates, without slide rails.
This skid has 141 rails. CMX mounts the skid farther back and runs a very loose track with extroverts. I have the measurements from the sled it was removed from and can provide them with purchase. Dimensions are from the driveshaft centerline and the top of the tunnel.
I also can provide mounting instructions from FTX for a 3" pitch 141 track with 8 tooth drivers and 8" rear wheels.
The tunnel mount plates are included but there is a crack by one of the 3 bolt holes so it will need to be repaired, or the plate can be installed farther back and one of the other two forward bolt holes can be used.
I also have a set of 121' rails that I will swap out to use this skid with a 121" track.
I can box it up and ship it if you pay for the ride.
I have pictures but am unable to get them to upload. Pm me with an e mail address and I can send pictures.
Last edited: