AXYS TSS Question
- Thread starter LoudHandle
- Start date
So...if I remember right, back in the old days if you had a switch in the throttle block fail you could just unplug it and it would bypass the thing....apparently that is no longer the case?
I admit, I haven't had one fail in many many years, so I dunno!
I admit, I haven't had one fail in many many years, so I dunno!
Not the case anymore. You are done if it rips out. The ohm load must be correct for it to function correctly.
They made it a double fail safe when they started making them with fuel injection. Essentially like the SkiDoo factory tether. It will run but next to impossible to move the sled under it's own power.
Yes, the old style Carb'd sleds could be just disconnected or removed entirely.
Back to the top for those in need / want of TSS Bypass Jumpers
TTT
TTT
This saved our *** big time few days ago! Friends sled went into tree & damaged the TSS wires. Our group was 6 miles from truck in deep snow. Would have been a nightmare to get the sled back. Instead I had Loudhandles TSS delete in my bag. Installed it & finished out rest of day riding!
Last edited:
Pm sent
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
OK... couple questions:
-Where and how does this bypass plug in?? Any photos?
-What are the signs that the TSS is failing and needs to be bypassed?
Thanks
It not a matter of if- it's when.. and this a good tool to have in your bag when it does-as when you depress the throttle off idle it will die- is one of the tattletail signs, or an intermittent cutting out.
There is a black velcro bag right below your steering post above your coils.
Best way to explain is look at the first post Picture and there is a male -female connector that needs to be separated and replace with this bypass.
Another way is to follow the wires coming off your throttle block, it will lead to the black velcro bag- there is only ONE connector that will accept the bypass plug... There are post in the Axys section that show's the correct location doing a search.
Just finished making 50 more for those wishing to exercise this option
Just completed making 50 more today, for those wanting to take advantage of this option! PM me for purchasing details.
Just completed making 50 more today, for those wanting to take advantage of this option! PM me for purchasing details.
T
TurboMatt
Well-known member
Do you think this is a mod that would cause warrenty problems? Is the dealer gonna know it's there with out physically looking? I've run without a tss in my Pro for years( yes I run a tether always) and would like to do the same in my Axys. The tss is just in a bad spot, a place prone to damage & icing problems. I got enough things to worry about while I'm riding & I don't want a tss manfunction to be one of them!
Can not and will not, put back to stock before bringing in but no.
Disclaimer: This TSS delete is advertised as an emergency use. Please make sure you have a tether when running it.
But yes it works flawless!
How much is this little gismo?
$25 shipped I believe.
Due to forum rules I can not quote a price.
However AKFULLTHROTTLE is correct with his post for all US of A customers. I ship them via USPS Priority Flat Rate to US customers. To other locals, I typically can ship regular mail for a small upcharge.
Similar threads
